Appliance Type: Dryer

My dryer goes into cool down mode, but doesn’t cool or shut off.

I’m at a customers home, not sure what is going on with this dryer. It’s get no power. I have tested the thermistor NTC, thermal fuse, heater fuse, high limit thermostat, cycling thermostat, and 220 ac outlet, circuit breaker, and door switch… still no power

My dryer will only run for about 30 seconds, and will not run at all if there’s more than one article of clothing in there.

My dryer powers up, but when I press the button to start a cycle, it just clicks and stops completely.

My dryer shuts on and off every 15 seconds

stops in the middle of the heating cycle

Hi, nice website and I really like your video’s! Would you have the “tech sheet” for this model WED9470WW2? I can’t find it anywhere. My dryer is brand new, literally just delivered and yesterday I got it all ready by installing the 4 prong power cord, inlet water hoses, venting. I followed the installation guide, but when my wife attempted to press the start button after successfully powering up the dryer, the drum would not turn and the unit makes a very loud noise like the motor is trying to turn the drum, but something is preventing the drum from moving. I called Whirlpool to see if there were any shipping bolts that perhaps I forgot to remove and they said their dryers don’t have shipping bolts.

Please let me know if you have any suggestions. Whirlpool says they can’t send a repair tech over until Sept. 23rd to look at it. Seriously? That will be 6 weeks since we placed the order only to have it delivered and it doesn’t work, now need to wait several more weeks for repair.

Many thanks,

Chris

I have a whirlpool duet model wed9400ve1 that won’t heat. Do you have a video for that specific model on how to test the element and thermostats and then replace failed part? I found some videos but none for this particular model and they seem to really differ, some the elements up front others in back etc.
Thank you

where do I find a wire diagram or a video that shows the wire connections to the thermostat and cut offsensors on a Kenmore elite dryer model 11063012101.

I have examined the heating element of this Samsung dryer; but it did not appear broken. The coils were a bit black in some places but nothing broken. The inside of the dryer was filthy with lint … on the motor, in the heating element, and clogged in the lint exhaust hose. The tub spins and it has power. Is this low heat condition and indication that the heating element is going out or is there a problem with a thermostat not working correctly? What would cause a low heat condition in the dryer?

Thanks-

Fred / Lubbock, TX.

How to replace blower assy.

Your video shows how to diagnose the problem, but not how to fix it. Thank you for for the diagnostics, video that was very helpful. I really need a video to remove and replace.

We’re trying to determine what’s wrong with our dryer. The drum isn’t turning when it’s on, and my husband thinks the belt has broken. Is there another possibility? I saw an idler video that had similar problems as well. Wanted a resource for him to take a look at before trying to fix himself. Thanks!

My Controls appear to work normally, but drum doesn’t rotate. On initial Diagnostic test, when I press power btn, I get the Code 08, I’ve tested the Thermal Fuse, it’s OK.

I’m suspicious of Broken Belt switch, as it doesn’t click when I depress lever.

If the Code 08 doesn’t mean anything, I plan to continue with motor control test.

Thanks, Bill

I watched this video: http://www.youtube.com/watch?v=v4ULq9svKZk.

When I tested the 2 connections on the top of the fan thing, the one on the left had continuity but the one on the right did not. Then we removed the heating element and it was broken so I ordered a new one. But if I also didn’t have continuity on the operating thermostat does that mean that needs to be replaced as well? On the video, I couldn’t tell exactly what parts he was referring to.

·

Hi, I have a Samsung dryer that is running but just not heating. I have replaced the Heating element and checked all of the thermostats, thermistor, relay and power. All are good. There is no lint blockage and the blower turns with the drum. I then took the entire heating element with housing and thermostats into a local repair shop for them to test and everything was good. I was instructed to disconnect the two wires from the relay and connect the blue and black wire together to try to get heat which again resulted in no heat. The local repair shop said that he knows of nothing else to check. Am I really out of options? Please help.

I’m curious as to what would be causing my gas oven to preheat and beep as if ready, but then not maintain it’s temperature after that?

My dryer seems to heating fine but the drum is not turning. How would I go about fixing this?

our dryer does not heat. i found the how-to video for dv210aew dryer. we have dv419aew/xaa model. would the dv210aew video work for my model as well?

thanks.

Can somebody get me the part number for gas coils for my dryer? It isn’t heating up anymore. My son is going to come fix this for me and I can’t find the number. I keep telling him it’s an easy fix and if I can get him here I want to make sure I have the part he needs to get it working again. Can’t have him yelling at me for not at least doing that. And thank you.