Brand: Electrolux

No matter where the control is set it freezes every thing.
How do I test this unit?
I need a service manual and tech sheet and any advice you can give

Electrolux. No matter what setting it’s set to the washer always uses scorching hot water. Coworker replaced valves and main board still only using hot water though. I have a kenmore today with the same issue and just wanted to know what it could be causing it? Hoses installed correctly, settings are properly set..

Leaking water.

Power outage, temp. alarm comes on, won’t stop. no response from display board. Replaced connections on display board.
Now I get response from display board but nothing else comes on.
Reset power one more time- Compressor comes on, stays running but interior lights and display beep and flash, total power interuption to everything but the compressor.
Does this still sound like the main control at the bottom?

This one has me stumped. Machine is giving E21 “Water not pumping out fast enough” error. Starts by pumping out at a trickle and occasionally will “kick in” to full flow. Pump sounds like its sucking air/air locked. Will drain properly every 4th or 5th attempt. Removed and checked all hoses, found all to be clear. Removed tub-to-pump boot and looked up with mirror to bottom of tub and could see the inner tub with no obstructions. Tried running pump directly with test cord to rule out low current from main board and tried new pump with same results. Any Electrolux experts out there with suggestions? Greatly appreciate any help

i need to see how to align the bottom door on this unit./ I found it once but now i cannot find itVIDEO

Frigidaire model#GLFH21F8HWE

I have an Electrolux Gas Oven M# EI30GS55JS – and the clock display does not light up the “1” for times 10:00, 11:00 or 12:00. It only displays the last 3 digits. example is the display looks like 1:00 when it should be 11:00.
The parts diagram shows a glass cover and a separate control board. All functions for the oven work fine. I think I need to order the glass cover(part#318923502) or the control board (part# 316576703)?

My Electrolux dryer is making loud noises and I don’t think it is heating properly. Sounds like something is rubbing.

My Electrolux washer is not cleaning clothes properly.

Can you tell me what could be causing this issue on a Electrolux Refrigerator? It is having these problems: No defrost or partial defrost

I have an Electrolux Refrigerator that is not working

Not cooling, Ice crystals.

Clothes will not spin out, banging sounds, boot is torn.

The compressor was bad, so I replaced the compressor about a week ago, and then that one burnt up. I replaced the compressor a couple days ago and the homeowner said that it is not cooling as it should and there is condensation on the food and milk in the refrigerator. If this compressor burns up as well, what could be causing this? And what can I do to fix it?

My Electrolux washer will not fill with water.

the programming starts normally, water and washing works, when it is on the programming to drain the water the pump does not turn off and shows error I30, I have already replaced the board and the same defect continues

Freezer evaporater fan motor not turning . He claims he checked the voltage and got only 4 v should be 12 between red and white for this units fan motor. It would not go into diagnostics for him. He’s blaming the board. We dont show this board as a very common part and I am questioning this. it. Any suggestions thanks

i was wonder if anyone can tell me how to replace the door seal on this unit
item #137066300