0 votes
3k views

My dryer goes into cool down mode, but doesn’t cool or shut off.

  • Warren Stolp asked 10 years ago
  • last active 10 years ago
1 vote
3k views

I’ve been noticing ice buildup in our freezer, and water gathering on the shelves in the refrigerator. Where is this water coming from?

  • Darren Boyles asked 10 years ago
  • last active 10 years ago
0 votes
2k views

Two year old refrigerator making ice but not dispensing through door. Water dispenser is working. What is most probable cause?

  • colin asked 10 years ago
  • last active 10 years ago
0 votes
2k views

Your video shows how to diagnose the problem, but not how to fix it. Thank you for for the diagnostics, video that was very helpful. I really need a video to remove and replace.

  • Christina asked 9 years ago
  • last active 9 years ago
0 votes
3k views

Fridgidaire (electrolux) affinity.
Error E66

Hi there and thanks for making the youtube video. I have the dryer open and the drum out. I have a multimeter but to be honest it is one of those tools I don’t really know how to use. What setting do I put it on to test the doohickeys? What am I looking for on the multimeter to determine if its bad or good?
After writing the first question on the youtube comment section I set it it the 20ohms and get a reading of 1.1 and 1.4.
Also when I took the dryer apart there was a lot of lint, coins and some other misc debris in the bottom of the dryer. Is this normal or might I have a leak somewhere?

  • stephen asked 9 years ago
  • last active 9 years ago
0 votes
3k views
  • derrick asked 9 years ago
  • last active 9 years ago
0 votes
2k views

the power failure alarm was on. could not turn it off the alarm on the door control because nothing was working. i unpluged and pluged it now the refrigerator comes on for couple second and goes off and does not stay on. it goes off an on what do i need to change to fix this problem

  • norman asked 9 years ago
  • last active 9 years ago
0 votes
2k views

Not sure what specific part would fix this but need to get it working as soon as possible for the holiday.

  • Brad asked 9 years ago
  • last active 9 years ago
0 votes
7k views

I’m attaching the Fault Code Guide for Frigidaire Appliances, the E014 error code lost connection between the User Input Board and the main board. I bet the cracked cook top probably has something to do with it. Frigidaire Range says EO-14 Code is present . He has a bad cooktop as well frame cracked.

0 votes
2k views

I think this unit will need a dispenser and cover, do you guys by chance have that lookup information available for me while I’m here?

0 votes
5k views

Electrolux range today, According to tech it was built by Dacor. We were transferred to Dacor and sat on hold about 15 mins and never got an answer. The customer complaint is with the racks removed he sets the unit into self clean and the light showing “remove racks” stays lit, the door won’t lock and go into self clean. With the rack rails also removed the rack switch does click like it’s working. Any advice sure would be appreciated.

0 votes
2k views

I have an Electrolux Gas Oven M# EI30GS55JS – and the clock display does not light up the “1” for times 10:00, 11:00 or 12:00. It only displays the last 3 digits. example is the display looks like 1:00 when it should be 11:00.
The parts diagram shows a glass cover and a separate control board. All functions for the oven work fine. I think I need to order the glass cover(part#318923502) or the control board (part# 316576703)?

0 votes
2k views

Freezer evaporater fan motor not turning . He claims he checked the voltage and got only 4 v should be 12 between red and white for this units fan motor. It would not go into diagnostics for him. He’s blaming the board. We dont show this board as a very common part and I am questioning this. it. Any suggestions thanks

0 votes
2k views

It is really loud in it’s final high speed spin. Found the bearing bad and priced it out, but customer doesn’t want to spend that much. Is this normal?

0 votes
2k views

Is there some trick to getting these bellows on in a timely fashion? I am having a hard time with this one and can’t seem to get it. It’s making me think I should know better but missed that day in class. Any tips for me?

0 votes
2k views

I have multiple issues with this refrigerator. The unit is frosting and not cooling and the ice maker is not working. The display has three error codes. Do you have any repair videos on this model ? Thanks in advance….

0 votes
3k views

Water is dripping out of the dispenser on my Electrolux refrigerator.

0 votes
2k views

Unit will not make ice or dispense water. Water flow from valve thru filter head good. Have water going to water reservoir, but not out. Looking inside refrigerator there is an ice block on the lower right side of water reservoir cover. Any help is greatly appreciated.

0 votes
2k views

Power outage, temp. alarm comes on, won’t stop. no response from display board. Replaced connections on display board.
Now I get response from display board but nothing else comes on.
Reset power one more time- Compressor comes on, stays running but interior lights and display beep and flash, total power interuption to everything but the compressor.
Does this still sound like the main control at the bottom?

0 votes
2k views

Can Reverse osmosis filters be used on ice makers ?

0 votes
2k views

Electrolux Refrigerator. Nothing against Electrolux don’t know a lot about them we do mainly high-end /built in work.
Says in the morning he gets a slushy from his through the door ice dispenser.
Besides the obvious flap/dispenser door not closing, warm air intrusion etc. any brand specific idiosyncrasies / service bulletins /kits to be aware of with this particular unit and reported problem.

0 votes
2k views

This one has me stumped. Machine is giving E21 “Water not pumping out fast enough” error. Starts by pumping out at a trickle and occasionally will “kick in” to full flow. Pump sounds like its sucking air/air locked. Will drain properly every 4th or 5th attempt. Removed and checked all hoses, found all to be clear. Removed tub-to-pump boot and looked up with mirror to bottom of tub and could see the inner tub with no obstructions. Tried running pump directly with test cord to rule out low current from main board and tried new pump with same results. Any Electrolux experts out there with suggestions? Greatly appreciate any help

0 votes
2k views

i replaced the power board hooked it up and i get HI on both the freezer and refrigerator side

  • Guest asked 8 years ago
  • last active 8 years ago
0 votes
3k views

i need to see how to align the bottom door on this unit./ I found it once but now i cannot find itVIDEO

  • Guest asked 8 years ago
  • last active 8 years ago
0 votes
2k views

I know Robert has a video i think it is on a whirlpool french door refrigerator where he demonstrated how to set it up so there are not gaps but i cannot get to it now pls see if you can guide me to it thanks

  • Guest asked 8 years ago
  • last active 8 years ago
0 votes
2k views

My Electrolux dryer is completely unresponsive.

0 votes
2k views

Unit was originally a no cool call. I replaced the Interface and control board kit#5303918583. The unit would then not give any ice or water. I went back and took the connectors all off the interface board and reattached. Unit started making ice and giving water, however now when the unit fills the ice maker with water it also runs the water at the door. Anyone with a direction to point me in? Thanks in advance

0 votes
2k views

My Electrolux dryer is making loud noises and I don’t think it is heating properly. Sounds like something is rubbing.

0 votes
3k views

i was wonder if anyone can tell me how to replace the door seal on this unit
item #137066300

  • Guest asked 8 years ago
  • last active 8 years ago
Showing 1 - 30 of 202 results