0 votes
8k views

Our dishwasher quit working and is flashing an ER code. How do we diagnose what it needs?

  • Chris Higginbotham asked 9 years ago
  • last active 9 years ago
0 votes
2k views

The temperature in the freezer at 17 degrees
I cleaned the coils and I feel cold air blowing inside the freezer as well

  • Guest asked 8 years ago
  • last active 8 years ago
0 votes
24k views

Frigidaire refrigerator fphg2399pf1 is dead. No lights . . . not working. Tested outlet. Have electrical diagram. Mother board has power. Ordered new motherboard. Did not fix.

  • Guest asked 8 years ago
  • last active 8 years ago
0 votes
2k views

This is a French door refrigerator. The ice room drain freezes up and the air vents fill with water and freeze.
Has frigidaire ever found a sure fix?

  • Guest asked 4 years ago
  • last active 4 years ago
0 votes
17k views

refrigerator is not cooling at all but the compressor is running

  • Guest asked 8 years ago
  • last active 8 years ago
0 votes
7k views

Hi, I wanted to find out how to replace the element in my oven? It cracked and broke in half while I was using it and my neighbor said I could probably handle replacing it myself. Would you advise this? I’m not sure if it’s something I could do or not. Any help would be appreciated!

  • Andrea asked 10 years ago
  • last active 10 years ago
0 votes
3k views

So I changed the coils and the igniter and the senser.
The falme still will go on for 5 to ten seconds and then go off.
And will repeat about 1 minute later
I have have taken the vent off of the back and no difference

  • Guest asked 8 years ago
  • last active 8 years ago
0 votes
2k views

How do test the control board on this refridgerator?

  • Guest asked 8 years ago
  • last active 8 years ago
1 vote
2k views

the screen will only display this “—–“
nothing else works on the screen.

  • Guest asked 8 years ago
  • last active 8 years ago
0 votes
2k views

Dispenser Problem/ Repost from yesterday
Refrigerator Frigidaire
Unexpectantly the dispenser hatch rapidly opens and closes and if the dispenser is set to water it comes out each time the dispenser opens and closes. What is the cause of this problem? The customer said she googled it and found it is a common compalint. Is this so?

The main problem is NOT trickling water but that whenever the dispenser WANT’S TO; ALL ON IT’S OWN ACCORD it , at any time opens and closes its hatch over and over for several second’s then stops. Without ryme or reason. Wouldn’t this be a circuit board issue? and call for replacing it?

I replaced the dispenser module first and that didn’t help at all. Then I reinstalled the old one and replaced the main control board, and that seemed to fix it then after three trouble free days then it started again. Now what do I do? Is the display a possible cause? It is almost $500.00. Any other ways to try to determine what is the problem?

This dispenser module you sent is the one I replaced. 242100019 Sorry for the confustion. Any other suggestions

Does this question goes against my quota?

  • Guest asked 7 years ago
  • last active 7 years ago
0 votes
2k views

how to put in defrost mode in fresh food ice room? ice room evaporator keeps icing up

  • joeski1369 asked 5 years ago
  • last active 5 years ago
0 votes
3k views

My Frigidaire Professional FPHD2491KF buttons don’t work. Well only two light up when I press them. The start button does not work so I can’t run the machine. Would that be a console assembly problem or a pc board problem? How would I find out which one needs to be replaced as I have searched many forums and websites indicating that it can be either the PC board or the Consol assembly (panel where you press buttons) Thanks!

  • Pedro asked 9 years ago
  • last active 9 years ago
0 votes
1k views

I have a frigidaire refrigerator that I’m working, at first it was completely dead. Since I’ve been working on it I have changed out the mother board, the temperature control board, the thermostat, and start device and capacitor. Now I have power going through the unit. The compressor turns on the condenser fan runs and I see a reading on the temperature display. The down fall is after 10 seconds the lights in the fridge start flashing and around 40-50 seconds the compressor shuts off. What could be the cause of this? The only 3 things I haven’t replaced is the thermistor compressor and evap fan.

  • Guest asked 5 years ago
  • last active 5 years ago
0 votes
1k views

Frigidaire model#GLFH21F8HWE

  • Guest asked 3 years ago
  • last active 3 years ago
0 votes
2k views

Good morning. I did not see the fridge yet, but I was hoping that I could get some of the most common problems with this unit., and what to look for. Thanks, Todd from NY.

  • Guest asked 6 years ago
  • last active 6 years ago
1 vote
3k views

The water supply is good. The voltage to the primary valve at the brown harness is only 66vac. Isn’t it supposed to be 120vac? The voltage to the dispenser silnoid it 120. I tested the triac at the brown harness tan/yellow and the blue harness at the yellow and blew and it checks good. Is that a proper way to test it? Does the voltage supply come through the main power board? If so then is it the problem? Any advice?

  • Guest asked 6 years ago
  • last active 6 years ago
0 votes
589 views

The broil and bake igniters are not turning on.
The oven chimes when I switch it to bake or broil but the igniters do not glow hot. Could the main circuit board go out? This is a very popular oven and brand. I could not find it on your website. When will you have a video on this range?

  • Guest asked 1 year ago
  • last active 1 year ago
0 votes
2k views

My washer has been making a noise and finally stopped spinning. When we took back off the belt was off and the clutch was off. What do I need to do?

  • melissa herron asked 10 years ago
  • last active 10 years ago
1 vote
2k views

it is an electric dryer.
the drum turns but will not heat

  • Guest asked 8 years ago
  • last active 8 years ago
1 vote
2k views

what is the easy way to replace the water valve?

  • Guest asked 6 years ago
  • last active 6 years ago
0 votes
446 views

Could this be a mainboard issue?
Bake relay P7 Yellow and P2 Black 120 ac when the oven is off and 0 ac when it is on.
Broil element K2 relay also 120 ac when the oven is off.

  • Guest asked 11 months ago
  • last active 11 months ago
0 votes
3k views

I HAVE NO POWER TO THE WATER CONTROLS ON THE DOOR AND THE EVAPERATOR FAN IS NOT WORKING. REFRIGERATOR BEEPS EVERY FEW MINUTES

  • Guest asked 9 years ago
  • last active 9 years ago
0 votes
2k views

When I push the start button u hear the motor trying to start and then goes dead.
I changed the belt worked for one cycle and then stoped

  • Guest asked 8 years ago
  • last active 8 years ago
0 votes
2k views

The temperature in the freezer is 49. The refrigerator is 59. The temperatures are set at -6 and 33. I unplugged the main board and plugged it back in and the compressor and condenser fan started but quit later. Have you seen this before and is it the main board?

I need a service manual for this model also.

  • Guest asked 5 years ago
  • last active 5 years ago
1 vote
2k views

Service Manual ?

  • Guest asked 5 years ago
  • last active 5 years ago
0 votes
2k views

THE CUSTOMER IS TELLING ME THAT THERE IS HEAT, BUT THE DRYING IS TAKING TOO LONG. I DID NOT GO TO SEE IT YET, COULD SOMEONE WALK ME THROUGH THE DIAGNOSIS? THANK, TODD FROM NY.

  • Guest asked 9 years ago
  • last active 9 years ago
0 votes
2k views

So it takes a long time for it to preheat the igniter is fine after some time the oven shuts off but the preheat light remains on

  • Guest asked 8 years ago
  • last active 8 years ago
0 votes
2k views

I’m hoping one of the techs there can help me figure out what part I need to replace. I’ve checked the line and the pump for any debris but didn’t see anything. Just sounds like the pump isn’t actually working correctly. Is it more than one assembly I’ll need to replace? A video would be great as well if you can find one for me.

  • Ray B. asked 9 years ago
  • last active 9 years ago
0 votes
2k views
  • Richard Bolyard asked 9 years ago
  • last active 9 years ago
0 votes
2k views

Burners now come on sporadically but are mostly out.

  • Guest asked 7 years ago
  • last active 7 years ago
Showing 1 - 30 of 394 results