Brand: Kenmore

I asked you last week about a Kenmore upright freezer that I determined to have a bad compressor. I got there and the temp in the freezer was 68*. I was told that it stopped freezing a few days ago, ( probably more than that ) and so I checked the evap/fan and it was working fine. So, I pulled it out and checked the compressor and it was so hot, I could barely touch it. I unplugged it for about 15 minutes and put a hard start on it, because the relay was bad. Let it run for about 20 minutes. Both the compressor and hard start were hot.
I was schooled to think that if the compressor is that HOT, and has been running like that for a while; that it’s NO GOOD. The reason is, as I was told, that the high temp breaks down the oils, etc in the compressor.
My customer had another freezer ( chest type ) and it was also NOT freezing. I opened the compressor panel and checked the temperature of the compressor and it was HOTTER than her upright. ( sho has a coffee plus shop ). I told her that both freezers were no good.
Anyways she called her refrigeration service people out. He told her, that the only thing wrong with the chest freezer is that it needs to be defrosted.
QUESTION: was I schooled correctly to think that if the compressor runs that hot for an ” unknown ” period of time that it is NO GOOD?

tried new pump with old board and old board with new pump and new pump with new board same issues

I have a Kenmore refrigerator model number 797.77563600 on a plane video it comes up with no match I am having an error code on this refrigerator ER FF

MACHINE DOES WORKS. DISPLAY “AF” ERROR CODE.ELECTRIC DRYER.

so i checked up what the blinking light read and it came to F5E3
hoe ever the unit did run once and then it stopped i can hear the drum trying to turn and then shots off can it have to do with the timer as well?

Hello this specific issue is on a Kenmore dryer 796.81172210. The cooling light stays on and there is no heat. I have replaced heater which solved the heat issue but my question is why is the cooling light staying on??

I have experienced this issue many times in Samsung dryer especially once it’s fixed the heaters on and the light stays on after repair Any thought to why this is?

Is there a self diagnostic mode. If so please explaine how to use it.

Have a refrigerator with broken wires at bottom of freezer door. This is causing the ice maker not to run. Is a new wire harness available and any info on how to replace.

Model – 253.26082100 Serial – WB63832311

Display in door flashing CE. Disconnected / reconnected wiring harness from control board that goes to display. Did not changed anything . Found upon opening door slowly display would clear out CE and then come back as you moved door.
Suspect wiring harness in door problem. Parts breakdown shows harness in bottom of door, but no part number. Anybody come across this before? Are you able to replace this harness? Thanks in advance

I have a Kenmore Elite Dryer and I keep getting a F code. I have cleaned the lint trap but it keep stopping.

The issue started with ice buildup on the bottom of the freezer. After watching your videos, I was able to correct this issue and had to unclog/defrost the drain line and replace the evaporator fan motor. During the repair, I’ve noticed that the light in the freezer does not always come on or go off when it should; it flickers intermittently. Also, the alarm continually goes off. I’ve also noticed that when I press upwards on the area where the light switch is in the freezer, the evaporator fan comes on. I believe that this is due to a short, but I am not sure how to access this area of the fridge, as I can see now way to enter into the covering. Please help!

When I punch in this model # on any site nothing shows up

Timer motor will run to cool down part of cycle but won’t advance to off. The dryer ran from 10pm to 4am on cool down,

Icemaker on this refrigerator has quit making ice. Is it possible to manually cycle this icemaker to see if it is activating the water valve? The icemaker looks somewhat like an LG icemaker but there is no test button on it. I know that the valve could be bad. Thanks in advance

Kenmore Elite dishwasher made by Whirlpool that will not drain properly every time. Will work 1 or 2 cycles then at the end of the 3rd cycle will leave about an inch of water in bottom of the dishwasher. Everytime I drain the dishwasher through the cancel cycle it does just fine.