Brand: Samsung

I have a Samsung washing machine error code NF1 any suggestions.

Customer called with a Samsung dw model DMT400RHS, lights flashing on SMART AUTO and HEAVY.
Does anyone know what this code means?

Machine does not agitate or spin.

Samsung top load washer – each cycle will work in the customer manually moves setting – but if left on it’s own it doesn’t go into a spin cycle and gives an E3 error code. MODEL WA456DRHDWR/AA
SERIAL Y01X5AEC401444H. After doing research we saw that the culprit could be the hall sensor (dc31-00154a), this did not solve our problem. At this point we are guessing that it could be the state or control board, but are not very confident in this diagnosis.

SAMSUNG RS265 TDWP/XAA – purchased in 2012 .

Problems: no cooling air on the fridge compartment, but freezer has working normally.
The problem details:
o Water drained into and frosted under the vegetable bottom drawer for a couple weeks, stopped.
o Noise from fan was on and off in the following weeks and stopped.
o Now, no more cooling in the fridge compartment.
o I watched the VA video. Do you think the Evaporator Defrost system/heater, sensor, or the main board is needed for my refrigerator? What is the part number I should order on VA website?

I’d like to thank for your help.

I have the Samsung family hub refrigerator that is not cooling. It has the cameras in the refrigerator section. Do you have any repair videos on this model ?

How does one adjust the water fill level on this ice maker? Thank you for your replies.

We went to service a Samsung fridge that is not cooling on fresh or freezer side. Error code displayed as 22 C but we could not find anything with this error code. Compressor is a bit on the warm side but not hot and it does turn on. Evaporator and fan look good as well. Please advise.

I’m getting 7E error and grinding noises at certain points. It used to wash for a while, then stop with the 7E error. I checked that the water wall part that moves was attached properly and oriented correctly. Ultimately, I replaced the motor/sensor assembly. Now, when I start it, the water wall cycles back and forth, making a grinding sound when it gets all the way to the back (I think) and then displays 7E before even starting to fill. I can’t find anything binding. I removed the water wall track and it moved smoothly. I saw people on the internet saying that there is a problem with a magnet getting weak from the heat and no longer activating the sensor at the end of its travel. Could this be my issue? How to resolve?

Above Samsung dishwasher flashes lights for “Smart Auto” and “Normal”. User manual says it is a “heating over temp” error. Could not find tech sheet on unit (I don’t think they put one on the unit.). I Kept a service mini manual from a previous. Looks like the temp thermistor is bad, not the PCB. Has anyone else run into this type of problem with this brand?

27E error code on my refrigerator.

13E error code on my Samsung refrigerator.

I have this Samsung induction range not heating and has error codes, can you provide any information on the induction range ? Thanks Tim

My oven is displaying a C21 error code.

Hi thanks for your video on how to replace my ice maker it worked great. However my ice maker still does not make ice. It seems to cycle one time and then quit. So if I reset it it may make one tray and that’s all. Same results with the old ice maker I replaced. Any ideas?

Please can you tell me where the water valve is located on this refrigerator. water and ice not working. please attach video if there is one. thank for your help

My refrigerator is giving me a c21 error.

What does a 39 C error code mean?

Issue with Samsung Dishwasher.

Came across this Samsung microwave with the above error, tech sheet implicates the keypad/control panel. I managed to clean the ribbon cable to the control board and it seems to be working fine now. Could you shoot over the part information for the control just in case I get called back out on this? Want to have that handy.

I am getting a 9C1 error on my samsung dishwasher.

The fridge is leaking water into the bottom drawer and it is not cooling. I saw the video Samsung RF268ABBP Refrigerator Repair – Fresh food section is leaking water – Sensor. This is the closest to the model I have. Also another one I saw similar is Samsung RF266AEPN Refrigerator Repair – Not cooling properly, freezing up on the back panel – Evaporator and Defrost System. Am I better off trying to replace the sensor or the whole Evaporator and defrost system on my Samsung RF267AERS ?

Thanks in advance for your answer!