0
0

OK WELL THIS SAM WASHER IS NOT SPINING REPLACED THE ROTOR POSITION SENSOR AND STILL NOTHING AND WHEN DOING A DIAGNOSTIC CODE CHECK ITS GIVING ME A (AE6) & (DE) ERROR CODE THE WATER AND EVERITHING AND IT DRAINS JUST WONT SPIN I DONT HEAR A MOTOR HUMING OR ANYTHING

Model Number
WF42H5000AW/A2
Serial Number
000D5NAKC01833A
Request Resource Materials
Service diagnostics guide, Wiring diagram, Installation instructions, Parts manual, Parts breakdown, Service pointers, Videos, Warranty information, Any available materials
0
0

Hello
The (AE6 ) error code is The signals between the sub and main PBAs are not sensed because of communication error. Things to check.
1) Check the connector connections between the sub and main PBAs carefully.
2) Check for incorrect or loose connections, etc.
3) Remove the sub PBA C/Panel and check for any faulty soldering.
See all error codes and corrections on page #19 in the service manual link below. Also see (Manual test mode) page #34 in the test mode link that will show all stored error codes.

Showing 1 result
Your Answer

Please first to submit.