Brand: Samsung

I have a c72 error code on my refrigerator

Displaying C61 error code.

The code is no or long fill. The water is coming in ok. The machine will fill about half way up window then it will show code 4e then pump out and start to fill again. And just keeps doing that. I am at standstill. Help. Thank you.

Hearing a loud banging or popping noise emanating from the refrigerator. The sound is intermittent , maybe only happening once a day, but sometimes happens more often. What would be causing this to happen and can it be fixed?

French door unit with fresh food evaporator drain freezing up. Went out prepared to replace fresh food fan cover, but this one was different. The drain was steamed repeatedly from both ends, drain pan and evaporator, but to no success getting it opened up. Finally fished a 1/4″ plastic line up from the drain pan side about 20 – 30″ and forced steam up through the 1/4″ line inch by inch until the line thawed and water flowing once again.
This is the second time in the last 7 months we have had to do this process. I do not see a fix other than getting a new unit. The line freezes inside the back wall of freezer because of the way the line is routed. As you looking at the unit from the back, it is the drain tube to the far right side, the center drain is for the freezer.

See above. Newer model Samsung French Door refrigerator. Display is on the right hand side on interior of refrigerator. Above “Fridge” button flashes the letter C. Above the “Freezer” button flashes 40, 24, 25, and 65. Unit appears to be maintaining temp however it will intermittently trip the breaker. We have replaced main control board already.

Hello,
Our refrigerator is now 6 years old. About a year ago we noticed the refrigerator temp was getting warmer and the freezer temperature was getting colder than what was displayed on the LCD screen. The temperature is about 10 degrees warmer in the refrigerator and 10-15 degrees colder in the freezer. We also heard the evaporator fan started to get loud. We took the refrigerator apart and had to de-ice the coils in the refrigerator. There was ice covering from the thermistor, evaporator line, heater, down to the coils, all the way down to the drain.

We have checked the seal on the refrigerator doors – they are fine. We have cleaned the dust from the back of the refrigerator as well as underneath. We have made sure there was at least a 2″ clearance from the refrigerator to the wall and counters. An HVAC technician has come to our house twice to replace some of the parts. I believe a new control board was even replaced. I have the part numbers, just not with me now. Once the refrigerator has been de-iced, the temperature will start to warm in the refrigerator/colder in the freezer within 2 weeks. We’ve already spent $400 on new parts for our refrigerator, but it still isn’t fixed. We would really like a second opinion on how we could repair our refrigerator before we put any more money into it.
Please help!!!

Thank you,
Kendra & Drew

How do you put this unit into a diagnostic mode ?

i keep getting a c40 error code in my samsung refrigerator.

This is a replacement kit found on many samsung washers there are no videos explaining how to do this. Please add a video thank you

Control panel LEDS are flashin On, , Off, On. This happens right after the unit fills, then drains and refills. I have changed the case sensor and water valve. I am leaning to a new flow meter before I take this unit out. Any help would be greatly appreciated.

I need to find a parts breakdown list or video repair help for this RF263TEAESR Samsung refrigerator.

Hi, I am looking for some instructions to replace the Water filter housing part number DA97-11435A in my samsung french door refrigerator RFG298HDRS.

Thanks,
Sridhar

induction burners not working when two or more burners are being used at the same time, ordered pcb inverter assembly # dg94-00728a . needs to know how to disassemble top to replace inverter assembly.

Water is leaking from ice maker in fresh food section, the cube seem to be melting slightly after production.

Refrigerator too warm

I ran a call today with a complaint of the fridge not cooling. Upon arrival the freezer was frosted up, so not a defrost issue. The evaporator was not frosted up. Lights on temp display are not working. Condenser fan motor would run then stop. I ended up checking everything and couldn’t find an issue. Advised the customer to leave unit unplugged with doors open and a fan in front of it for 24 hrs, then plug unit in and let cool for 24 hrs and monitor. Thinking door to freezer just got left open overnight?

Looking for some confirmation or other suggestions if someone has anything.

Samsung gas dryer heats and turns on for 2-3 minutes then shuts off flashing eo code.

I have an issue with a Refrigerator, it’s a Samsung and this is the problem I am seeing: Error code E2

My refrigerator is displaying a c82 error code.

C6 error code

This unit had an ice build up in the FF evaporator fan area. I ohmed out the heater and it was good, I replaced the thermistor and thermal fuse. I have received conflicting information that the thermistor should be moved to as high a location as possible on the evaporator lines and also that it should be moved down to the middle of the evaporator and the main board should be changed as well? The thermistor wires are very short and cannot move very far. The part number is DA32-00029Q. I’m sure there is another workable part number with longer wires. . There were no error codes. FF section had warmed up. Evaporator fan was stuck in ice.

We have had this fridge since 2011. About a year ago the fridge side wasn’t cooling but freezer side works fine. I finally did a lot of research and discovered that we have a dual evap fridge and decided to take matters into my own hands and open up the back of the inside fridge panel. I did find a little over frosting on the evaporator and I let it defrost. It begin working again. it would last a couple of months and do this again. More recently it started to not cool and I would just leave it alone and four days later it would start cooling again on its own. Now finally its been two weeks and has not cooled at all. I opened it up and the evaporator was somewhat frosted up and so was the drain hole. I unplugged it for 24hrs and let it defrost and made sure the drain hole was clear of ice by pouring a small amount of hot water in it. When I plugged it back in I noticed one flashing light on the temperature setting. the fifth light from the bottom to be exact, and I wasn’t able to press no other buttons. I unplugged it and plugged it back in and it went away but the fridge still won’t cool. Everything that I have tried does not work. I ordered a new heater-sheath but now I’m wondering if I need a whole new evap assembly. Please help! we are so tired of having our food in a ice chest. Thank you for any information you can give us.

unit will wash and drain and shuts off with 8e code be for spin.