Brand: Fisher & Paykel

Unit is running constantly, not turning off by itself. It’s also leaking water and tripping the flood switch. I think it needs link kits for both drawers, and an upper drawer seal to solve the leaking. I cleaned a lot of debris from the sump areas and it completed a cycle and shut off by itself. Could you guys help me out with parts availability and numbers?

Checked the inlet valves, hoses, made sure I had water to the unit – it all looks good. Am now wondering if there’s an issue with the drain pump that is causing the unit not to start a cycle at all because the customer says it hasn’t been going into drain by itself, she was manually making it. What’s the part information for the pump if I do end up needing that?

Compressor will receive too much power and burn out.

Not very knowledgeable on these yet and am wondering if it’s a bearing like many other brands? Has a slight rubbing noise as well, am thinking it may be more than one thing but not sure. Any help would be great.

Can you tell me what could be causing this issue on a Fisher & Paykel Dryer? It is having these problems: Cannot select cycles

Noise from fan blade striking objects around it.

I need the part information for glides & a front upper bearing. Thanks!

Looks like the relay on the control board for their gas heat is bad & it needs a control module. Problem is, we don’t do many of this brand and I don’t have a lookup for this dryer. Any way someone could get me part information?

I think this is the hot and cold solenoids but I can’t find the parts for them. Hoping you can get them for me. Only do a couple of these each year .

I just applied the reset button on the heater housing thermostat and ran an operation test that was successful. Should I price out that thermostat for replacement or will that work?

I purchased a Fisher & Paykel fridge some years ago and now the handle on the fridge has broken off. The top of the handle is a hook that goes into the door and the bottom looks like it had a lug into the door that has sheared.

I narrowed this down to an inverter board but now can’t get the model breakdown to come up. Any chance you guys can send it over to me, or the board part number?

Does anyone know how to read the new producy codes on Fisher & Paykel appliances

In getting it apart, looks as though I need a a diverter valve, does someone have time to get me the number? My lookup isn’t working very well and I’m in front of the torn down unit right now. Need to get this estimate written up.

I’ve been trying to find an element for this dryer, it’s not heating and I’m pretty positive this is what it needs. Am having a heck of a time tracking it down.

I found the thermal fuse blown and reset it. Seems to be working fine now. Should I just replace it to be safe? Am assuming it will happen again and would save a trip charge for the customer.

Steam cycle will not work, garments are not refreshed.

Drum bounces around, grinding sounds while running.

The clothes are still coming out of the dryer wet.

Motor will not run, lights come on but will not start, electrical burning smell.

Unit will not run, will not start.

My Fisher&Paykel washer is making a squealing noise.

The drum will not spin on my dryer.

My Fisher & Paykel Washer will not drain or go into any other cycles.

How do you remove the basket from the drive unit?