HOW DO I TROUBLESHOOT THIS? I SUSPECT BAD WATER VALVE. NO WATER IN TUB AND COMING UP WITH U6 ERROR CODE. THANKS.
- mdhomeservices asked 6 years ago
- last active 6 years ago
No error codes come up. The clothes are getting clean. What makes the agitation on the agitator? When the water fills to a certain level is this when it supposed to agitate. You can see anything because of the lid lock. I assuming that it does. Is there any way to see why it is agitating? Also is there a video to show to how to change the diverter valve. The one I have is leaking right under the diverter pump.
- Guest asked 8 years ago
- last active 8 years ago
Where do I find repair info on this machine? Also would like help with taking the cabinet apart to fix the problem
- Guest asked 7 years ago
- last active 7 years ago
when you wash the dishes it gets to the rinse the unit just starts beeping and continues to beep? Have you heard of this problem and know what the the common problem for this unit is. There is a little water in the unit after the drawer is pulled out. Is this normal?
- Guest asked 7 years ago
- last active 7 years ago
I have a dish drawer that overfills.
- Guest asked 8 years ago
- last active 8 years ago
Parker &Fisher, not spinning motor getting hot? Is there a way to know transmission is bad? How do you put this machine in diagnostic mode?
- Guest asked 8 years ago
- last active 8 years ago
Washer isn’t going into spin cycle?
- Guest asked 8 years ago
- last active 8 years ago
unit will not stop running, dryer shuts off too soon, front panel is hot to the touch.
- James Buchanan asked 6 years ago
- last active 6 years ago
My dryer needs some help! Has power, seems like it should start, but the drum doesn’t turn at all. Need this working and would be willing to take it apart if it’s something I can fix. If not, is it worth calling someone to come look?
- Pamela Ames asked 9 years ago
- last active 9 years ago
In getting it apart, looks as though I need a a diverter valve, does someone have time to get me the number? My lookup isn’t working very well and I’m in front of the torn down unit right now. Need to get this estimate written up.
- Harley Clark asked 9 years ago
- last active 9 years ago
Display keys are not woking properly, can you give me a video on this model ? Thanks
- Don Kopecky asked 8 years ago
- last active 8 years ago
I have an issue with a Refrigerator, it’s a Fisher & Paykel and this is the problem I am seeing: Compressor will not start
- T&G Appliance Repair asked 7 years ago
- last active 7 years ago
Not cold inside, No airflow through vents, High pitched squealing sound.
- Harley Clark asked 6 years ago
- last active 6 years ago
Steam cycle will not work, garments are not refreshed.
- Curtis Appliance Repair asked 6 years ago
- last active 6 years ago
The wash program selector is stuck on “Rinse” and will not move.
- Ed asked 9 years ago
- last active 9 years ago
I have a call scheduled to run and haven’t worked on many of these, I’m assuming it will be a simple fix, maybe an element, but wanted to know if you had any information on them that would help to familiarize myself? Thanks.
- Gary Williams asked 9 years ago
- last active 9 years ago
My Fisher&Paykel washer is making a squealing noise.
- Fred Abernethy asked 9 years ago
- last active 9 years ago
My dryer is not drying clothes properly.
- Curtis Appliance Repair asked 7 years ago
- last active 7 years ago
My Fisher&Paykel refrigerator leaks water.
- Patrick's Appliance Service asked 7 years ago
- last active 7 years ago
No water to Ice Maker, Water may not dispense.
- David Sutton asked 6 years ago
- last active 6 years ago
Motor will not run, lights come on but will not start.
- Hall Refrigeration asked 6 years ago
- last active 6 years ago
I’ve noticed that the top drawer fills with water slowly after a wash cycle. The bottom drawer is fine. If I don’t run it for a while, the water continues to fill. I’ve read that it could either be the water inlet valve or the drainage hose. I believe that the drainage hose is positioned high enough with a loop such that water can’t come back in.
In my debug mode, I’ve since shut off the water source into the dishwasher and I’m hoping to wait a few days to see if the top drawer continues to fill up.
Are there any other tips that might be useful? (I’ve watched the YouTube video for repair of the inlet valve).
Are there other troubleshooting things that I can do to narrow in on the problem?
Thanks,
Jon
- Jon asked 9 years ago
- last active 9 years ago
I found the thermal fuse blown and reset it. Seems to be working fine now. Should I just replace it to be safe? Am assuming it will happen again and would save a trip charge for the customer.
- James Buchanan asked 9 years ago
- last active 9 years ago
My Fisher & Paykel Washer will not drain or go into any other cycles.
- Curtis Appliance Repair asked 8 years ago
- last active 8 years ago
Dryer making a squeeling noise when running? Need video on drum bearing kit on how to repair and how to gain access to the inside.
- Guest asked 7 years ago
- last active 7 years ago
My Fisher & Paykel dryer will not heat.
- Curtis Appliance Repair asked 7 years ago
- last active 7 years ago
