Brand: Thermador

looking for some help on this dishwasher that I went out on it couple of days ago customer had two other companies out . Unit was full filthy water . I put to drain and cleaned it out , also cleaned filter . Restarted unit it filled and didn’t wash sounded like it was draining some water out but nothing else. Found no tech sheet with unit. Ordered circulation pump when out and install put unit still doing same thing. I am not very familiar with this brand, any help would be appreciated. Thanks

Hi Folks,

A Happy & Safe Fourth to all!

This unit is in very good condition and the problem element has not been used that much. Facing the unit it is located on the lower left, smallest element of the bunch. You turn the switch to the on position and the element switch lights up. Set the heat temperature and that lights up too. But no heat at all. Now I took the cooktop out and the element tests okay. Actually there is no wear at all on the element. Looked for disconnected wire(s) found none. Really don’t know where to go from here. Where is a good place to get a break down of Thermador products? Looking for some expertise from the Video Family.

Thank you,
Jan
Barney’s Appliance
Palm Bay, FL

I have a Thermador built in refrigerator with a evaporator leak. The unit was built by Kitchen aid. I know the Kitchen Aid evaporator and heat exchanger are 1/2 to 1/3 the price of the Thermador parts. Does anyone know where I can find the Whirlpool part number for these parts or maybe get the equivilant model number.

Thanks
Mark Kelly
Kelly’s Appliance Center

Any idea what error this could be ?

Looking for two Thermador hinges part # 00488417
Any help would be appreciated

When set to bake, after about 20 seconds the unit codes out with f-34. tech sheet only says: replace air switch, then replace cooling fan, then replace control. all 3 have been replaced, in that order, and its still giving f34. the tech sheet doesn’t give any other information about the code. Anyone have any suggestions?