Brand: Samsung

Hello I have a question on a Samsung Dishwasher. I’m noticing these issues: Water drains out before wash cycle

The door chute is stuck on my Samsung refrigerator.

My Samsung dryer will not heat up.

The compressor on my refrigerator dosnt seem to be running.

My Samsung refrigerator is not cooling properly.

Dishwasher is having some problems

Giving error code 5a6 or sab on display nothing work

I am having the customer to unplug and thaw the unit. It is frozen in solid. This is a french door with the Ice room in the top left side of the refrigerator section. I need the service manual so I can run the diagnostice on it when it thaws and any pointers what to be looking for. Have you seen this before? Does the video about the diagnostics on the Samsung model apply to this one? The model # is different?

Every two months after defrosting manually an ice ball forms that stops fan from turning requiring manual defrost again.

Could you supply me with info on this model

In the ice maker compartment, is ice built on bottom of ice maker and also the sides. When this happens the ice maker will not work. I defrosted ice maker, and ice maker will make ice until it ices up again. Does the gasket to the ice maker compartment need replaced?

No Cooling in Freezer,Frosted build up on evaporator.

Not making ice.

Hot to touch, Vibration sound, Assembly can get clogged and corroded

Belt snaps, Burning smell, slow spin

Wash motor will not heat, Wash motor starts and stops.

Will not lock for self clean cycle.

Higher temperatures in the ice room, Auger is not turning in the bucket.

Dull light from bad LEDs.

Long drain time, No drain, Error code 1E.

Over voltage, under voltage, buzzing noise.

No tension on the belt, noisy operation.

Samsung french door refrigerator is not dispensing water. The customer recently replaced the water filter. Checked the water filter for proper installation – checked fine.

Disconnected the quick connect fitting at the top of the left hand fresh food door and blew through without obstruction – no ice build up.

Press the water dispenser paddle and here the valve being activate – but no water dispenses.

Keeps flashing error code 33.

I am Changing a DC97-18439A Clutch assembly for the Fist time. I do not see a see a relevant video on your Site.
Which on is close?

No display on interface. There’s 120v coming in so there is power.

My refrigerator is displaying an error code and i do not know what it means. it says “C23”