My dispenser does not dispense any water or Ice. Although if I initiate the dispenser at the same time pull down with my index finger to initiate the movement , It does work. The other part is, If I loosen the screws holding the assembly in place and Pull it toward me just a little it also works. Very strange. I’m missing something, Just don’t know what it is…Can you help
- Bob Henderson asked 11 years ago
- last active 11 years ago
Hi,
We have a over the counter microwave and I have already replace the door fuse all 3, each of the fuse has fix the same problem every time and this last time (4th) not sure what will it take.
Here is the problem: If we leave the door close there a noise like if the micro is on but the plate is not turning around the light will be of but if i leave a cap of water it will heat it up, but if I put time it will work like is fine with light on and plate rotating till the time end.
the fuses have a normal click when you push them on, I’m not sure if it will be the master control which is about the same price as a new micro.
I search on your site for parts but nothing show up, is a Frigidaire FMV152KSA serial KG93202752.
I was looking on your videos on the tube.
Let me know if you have parts need it for repair.
Thank you
- Martin asked 11 years ago
- last active 11 years ago
Hi, I wanted to find out how to replace the element in my oven? It cracked and broke in half while I was using it and my neighbor said I could probably handle replacing it myself. Would you advise this? I’m not sure if it’s something I could do or not. Any help would be appreciated!
- Andrea asked 11 years ago
- last active 11 years ago
when we try to get ice or water out of the unit , it will not stop coming out
- Byrd asked 11 years ago
- last active 11 years ago
Frigidaire dishwasher bottom arm works great upper arm does not turn because the water does not go all the way to the top of the tube that runs up the side and to the top of the dishwasher and then shoots down to the upper wash arm . I have added more water and that does not help . If I stop the washer and restart it in a few seconds the water will start then flowing strong to the upper rack threw the tube . When this happens the lower arm them gets no water to it . I did take the motor out and found some glass in the motor wheel , removed the glass and reinstalled the motor but that did not help the problem. The motor runs and seems to be running fine could the motor not be running as fast as it should and be the problem ? Only thing I can think is maybe a motor problem , the motor does seem to be running ok .
- Rob asked 11 years ago
- last active 10 years ago
I’ve been noticing ice buildup in our freezer, and water gathering on the shelves in the refrigerator. Where is this water coming from?
- Darren Boyles asked 11 years ago
- last active 11 years ago
