I have a kenmore elite HE4 that will run for a while until it get very hot and cuts off. I have checked the thermo cutoff fuse, the heating element, thermostat high limit, and thermo cut off per your videos. Everything shows continuity with the meter. I have noticed that the heating element does not cycle on and off per your video. For what it is worth, it does not look like the entire heating coil itself is red either. There is an inch or two of it that does not look red to me. Is it possible there is an issue with the heating element that I am missing.
- Brett Davis asked 11 years ago
- last active 11 years ago
Hi, We have ice that builds up in the bottom of the freezer in our Kenmore Cold Spot side-by-side refrigerator/freezer. I break it up and clean it out and within a couple days, it’s back. I’m not sure what is causing it or how to fix it. I’ve seen many posts online but none are specific to my model….just want to make sure we do the right thing to fix it. Thanks in advance for any guidance you can give me.
Amy
- Amy Geiger asked 11 years ago
- last active 11 years ago
looking for the C Clip that holds the brake cam driver.
I have tried to find it in different appliance stores
- Raul de Alba asked 11 years ago
- last active 11 years ago
stops in the middle of the heating cycle
- John Herrera asked 11 years ago
- last active 11 years ago
I have a Kenmore Coldspot 52582201
The ice maker and water dispensers are dispensing slimy ice and gross slimy stuff in the water.
I change the filter regularly.
I love this refer. and don’t want to have to get rid of it.
Please help me
- evan asked 11 years ago
- last active 11 years ago
I watched your video (http://www.youtube.com/watch?v=jIdtNdDXFDk) and have this identical issue. I want to get the replacement tube shown in the video, so I called your parts department. After explaining my dilemma, I thought I got the right part, but after placing the order and looking at the part number provided – IT IS THE SAME AS WHAT I HAVE. Please advise as to how to order the replacement tube shown in your video.
- Beverly VonVolkenburg asked 11 years ago
- last active 11 years ago
My dryer powers up, but when I press the button to start a cycle, it just clicks and stops completely.
- Jose Lee asked 11 years ago
- last active 11 years ago
My stove is not getting any power, and I checked the breakers, and they are fine. What could this be?
- Joseph asked 11 years ago
- last active 11 years ago
My microwave seems to take much longer to cook than when it was new. What might fix this issue for me?
- Alysia Mastro asked 11 years ago
- last active 11 years ago
