ICE MAKER NOT WORKING CHANGED INLET VALVE AND ICE MAKER STILL NOT WORKING WATER IS GOING THROUGH ICE MAKER HAS CURRENT
NEW INLET VALVE NEW ICEMAKER
- Guest asked 5 years ago
Verify the ice type setting is either crushed or cubed, not NO ICE. Make sure the water supply is on and all air has been removed from the system. Check the water valve voltage. It should read 120V AC valve open and 0 VAC valve closed. Also a few other things to look for :
1) Check the air ducts near the icemaker for obstructions.
2) Check to make sure the Ice maker sensor value matches the measured value using the sensor table. The reading should be 3.2 Vdc .
3) Check the wiring harness for poor connections.
4) Run the unit through diagnostics to see if there are any error codes. See technician diagnostics manual links below.
Matt Ace technician
checked all componants said also turned freezor down in temp there is water fill into the ice tray but not freezing
- You must login to reply
Please login first to submit.