I’m having problems with this washer. Model #WFMC1001UC/13. A few months ago I changed out the drain pump on this washer and it worked for a while. When I went this time the washer would not agitate or spin but was draining great. I checked all the wiring, plugged and unplugged all the connections. I tested the washer and then it was running well. Customer stated it was spinning fine for a couple of days. Now complaint is a slow spin. Does anyone know what I should be looking at on this washer? There is a wiring diagram in the washer but I don’t have access to tech support. Any thoughts on this would be appreciated.
- Guest asked 9 years ago
- last edited 9 years ago
Unbalanced Load Sensor•Accurate measuring of unbalance by deviation of spin speedandslow down time of drum•Infinite adapting of spin speeds•Compensates reducing of spin speeds by prolonging spinning times•Will attempt up to 15 times to redistribute a load”
Also one of 2 things when you took the top off did you see what looked like dust on the out tub. that it a sign that the motor brush’s have worn you have to change motor. you can put into diagnostics hold menu and select button down , while there down turn time,control from 12 o’clock back one turn to 11 o’clock release the buttons you will be ito diagnostic move press the select button each time you willl go throw e fault codes will come up with a e- c- the c is the numbere of times it happened
- AV Repair Help answered 9 years ago
- You must login to reply
Please login first to submit.
