1
0

Hello, My Maytag french door refrigerator control panel was blinking and the ice machine flap was clicking. After several days, the refrigerator stopped cooling. I watched your very helpful video on how to replace the HV Control Board ( https://www.youtube.com/watch?v=fwoLQdcFv1Y&feature=youtu.be). I ordered the replacement board and did the repair myself. The interface stopped blinking and the fridge is cooling again. However, now the ice machine will randomly start dispensing ice into the door with out being prompted. I’ve had to turn off the ice machine so I don’t have a bunch of ice in the door and therefore dealing with leaking (it still attempts to dispense randomly with out any ice). Please help! Thanks!

Model Number
MF12067AES
Serial Number
10932512JN
What have you tried so far?

See above

Request Resource Materials
Any available materials
0
0

Hello, It does sound as if you could have a bad user interface, however all information we provide comes from the information we have attached. I would also make sure you have installed the correct part. All ( HV ) boards are different and must be looked up by the model and series number. Other than providing this detailed information there are no short answers for your issue, and corrective measures are all based on diagnostics performed in these tech sheets.

    • Guest
    • 6 years ago
    Thanks
    • Guest
    • 6 years ago
    Your “pointer” sheet says to replace the HV control board. I’ve already done that. You are not address the issue after the fact.
0
0

Hello, your model number provided is incorrect. The model number is actually MFI2067AES (there is the letter I in the 3rd character not the number 1). There is a kit for this that requires HV board to be replaced and programmed correctly . I have attached the service pointer along with the last 2 revised tech sheets and wiring diagram sheet for your model and issue. All information available is in these attachments.

    • Guest
    • 6 years ago
    Hello, I am not a Tech, so these wiring sheets aren’t entirely helpful. I’ve already replaced the HV board and followed the instructions from your video that I attached in my initial inquiry. Can you please tell me what my next steps are? Will have I have to replace the user interface board now? The HV board that I purchased and replaced fixed the cooling and flashing issue, I just have the ice machine issue now. Thanks!
    • Guest
    • 6 years ago
    This is the part that I ordered and was compatible with the issues I was having per my research. Again, it fixed the cooling and flashing interface issue. It looks almost identical to the part you sent me https://www.amazon.com/gp/product/B003ZE5NPK/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
  • I believe you replace the wrong part number. What was the part number for the H.V board you replaced? The correct part number should be W10890094 per the service pointer. Even though the H.V you installed may be working it is not the correct one and will be the reason the ice is dispensing. There are many different H.V control boards that will look the same and plug in and run but the software is different on each one per the series number of the board and unit. When you install the correct HV board it will need to be programed. You will find the instructions to program the new board in the box with the part or in the tech sheet. The program code is listed on the model number sticker inside the refrigerator.
    • Guest
    • 6 years ago
    Thank you…this is much more helpful
Showing 2 results
Your Answer

Please first to submit.