Brand: Electrolux

Hello I have a question on a Electrolux Refrigerator. I’m noticing these issues: Water dripping from dispenser

The ice in my freezer will not freeze all the way

I cannot figure how to access the glass top. Do you have a video that shows how to access control panel and under the glass for the elements?

error code 03

Ice build-up in freezer, Humming sound, Whining sound.

Electrical Smeel, Burning smell, runs for a while then shuts off, E69 Error, E11 Error.

Hello

We have an electrolux ewdw6505gs0 that we have had for about 6 years. Recently it stopped washing the upper rack as good as it used to. It’s not every time but appears to be more bad than good. I have removed all of the parts that the water passes through and have found no obstructions including the pump and hoses underneath. I am very handy and have an extensive set of tools so any repair or diagnostics necessary I should be ok to do. Dishwasher has never had problems until now. My hope is to fix it rather than have to shell out $800 for a new one. I suspect it could be a weak pump or a control board but I dont want to throw unnecessary parts at the problem you have a way I can diagnose what the issue is.

Thank you

My washer is displaying error code 35 and I’m not sure what it means.

Is there some trick to getting these bellows on in a timely fashion? I am having a hard time with this one and can’t seem to get it. It’s making me think I should know better but missed that day in class. Any tips for me?

I put my temperature probe into the fridge, it read 53*. The freezer was 19*. Opened the back to check the compressor. It ran hotter than normal to the touch. Everything was working. This is the first time that I worked on an Electrolux appliance.
Could it be the inverter?

My Electrolux washer is leaking water.

My washer is not cleaning my clothes properly.

The ice maker compartment is frozen in the back. Why is this happening. We have changed the ice maker, the new one is still freezing in the back.

Error code EY (or5Y) ES.
Was recommended to place the main power board (under the front let side) used part number 241996320
Replaced the board yesterday and it started up and was running fine now late this morning it stopped again with the same error code.
What would you recommend next. The unit is 3 years old.

Refrigerator short cycles, No power, Will not run, Dispenser flap engages on its own.

E5E Error code displaying, E43 Error, lights come on but will not start.

My dryer powers on/off via power button just fine. The knob selector also works appropriately. The start button does not always register being touched. Likewise, other “buttons” do not sense being touched (Temp, dry level, dry time, options, set, cancel). When the dryer does start, there is a lot of rapid beeping during the drying cycle. I cannot enter into diagnostic mode or perform a factory reset due to the lack of response to the key pad. I attempted to replace the UI board (part # 5304505611) but that did not resolve the problem. Last night, after managing to get the dryer started and run through a complete drying cycle, the unit restarted on a cycle without the unit being touched.

I am having issues with the panel on my Electrolux washer.

I have multiple issues with this refrigerator. The unit is frosting and not cooling and the ice maker is not working. The display has three error codes. Do you have any repair videos on this model ? Thanks in advance….

I looked at above refrigerator dispenser does not dispense ice or water sporadically. I plan to replace the dispenser module (part with the lever), not the user interface pcb. Has anyone else had a problem with that part? Thanks in advance

I was getting the E51 error on the machine. it would not turn.
I ordered a new board the board I got is # 809160304.
however it is not the exact same set up for the wires o have a black and yellow in the old one each had a spot now I have 2 spots for 3 wires each.
and when I turn the machine on without the yellow and black it runs for a bit and I hear the heating element clicking and the I get the f 64 error.
can you please help me with 2 wires.

Hello I have a question on a Electrolux Washer. I’m noticing these issues: Will not run

Sides are hot to the touch, Compressor cycles off, Loud noise.

I checked ALL of the “how to” websites looking for this particular part # to change out. I found NOTHING !!!
The complaint is that the dishwasher ONLY pumps out water. It does nothing else. I checked out the possible problem(s) and found that it is or could be a bad water sensor. Especially with this model number.