0
0

Evaporator and condenser fan motors running compressor running outer loop in front of door hot off and on open door light does not come on press button on control and light comes on but than goes out I suspect board is bad need video on how to replace the board and to know if I should check anything else compressor has a inverter board and when I open door switch what should my switch read when I check for continuity I do want to replace board without first being able to access the control and check board out I dont believe this has a main control board in the back correct me if am wrong

Model Number
GC5SHEXNS03
Serial Number
STO342344
What have you tried so far?

I going to switch out door switch does the light should come on when you open door

Request Resource Materials
Service diagnostics guide, Parts manual, Parts breakdown, Service bulletins, Service pointers, Any available materials
0
0

Hi. Attached is a video for replacing the control board. look at the link “service bulletin for light issue” This is what we would first suspect the light issue to be. As stated in this link, press the door switches in and see if you gets lights. If this is not the issue, check your door switches. With the door switch open you should read continuity if the switch is just a two wire door switch that controls the lights.

0
0

Hello
See links to all service information we have on this model. Sorry, we do not have a video on this model at this time.

0
0

Hello, I have attached multiple information files for you. Tech sheet, parts list and service bulletin/pointers.

  • my question was not answered should I suspect board in fresh food sec or am I fishing you have no video on this
Showing 3 results
Your Answer

Please first to submit.