After seeing the back freezer wall covered in frost. I know it is a defrost issue. How do I narrow it down to which defrost component is bad? How to test with meter?
Checked Evaporator Fan Motor, and Condenser Fan Motor.
- Guest asked 8 years ago
HI. I have attached some Samsung defrost repair videos for you. They will show you how to diagnose the part in your defrost system that is broken. You can test all the components from the control board if you are savvy with a wire schematic, or you can gain access to the evaporator and test right at the defrost components. Your defrost system consists of a heater, fuse, sensor, and the control board. You can also put your unit into a diagnostic mode and run a defrost cycle and check for error codes. On this unit you can order the evaporator assembly which is number on in the diagram of the parts break down I attached also. It comes with all the defrost components besides the control board and is often more cost defective to buy them this way. Attached also, is the tech sheet for this unit.
- Brian, Ace Appliance answered 8 years ago
- You must login to reply
Please login first to submit.
