0
0

the oven will heat up and then go off after some time and the bake light will blink. I changed the control board and it didn’t helpll

Model Number
mgr5875qdd
0
0

Hello
Are you getting any error codes ? have you checked the bake igniter to see if it is shutting down due to a weak igniter. Have you checked for proper voltage in to unit ? See test mode below and diagnostic links below.

Quick Test” Mode for Electronic Range Control
Follow procedure below to use the quick test mode. Entries must be made within 32 seconds of each other or the
control will exit the quick test mode.
1. Press and hold CANCEL and BROIL pads for 3 seconds.
2. Once the control has entered the “Quick Test” mode, release both pads.
3. Press each of the following pads indicated in the table below.
NOTE: First time one of following pads are pressed it will activate the response.
The second time the pad is pressed it will deactivate the response.

    • Guest
    • 8 years ago
    I am not able to get into the quick test mode. I press and hold broil and cancel for 3 sec and all I get is two beeps. the issue is that after a half hr or so the temp display will go off and the bake will blink. the oven will stop heating. and the igniter is new
Showing 1 result
Your Answer

Please first to submit.