replacing a thermister in a samsung wf393btpara /a2 Is this a simple repair or do I have to take off a bunch of stuff?
Is it a just take the back off and there it is?
I have a TE error.
- Tim B asked 9 years ago
If you need any parts call our parts department at 1-800-830-5465 or order on line at http://www.savemoreonparts.com See Samsung video link .. https://www.youtube.com/watch?v=Gsvye6sfO88
HI. I have attached a service guide for your dishwasher. TO gain access to components such as your control board you need to take the screws out around the door frame to separate the door. To gain access to the heater and other components you will need to pull the unit and gain access to the bottom. This is a vague error code for high temperature heating . First thing I would check is that you are getting the proper water pressure to the unit and that the incoming water temp. is not too hot.
- Brian, Ace Appliance answered 9 years ago
- last edited 8 years ago
-
I do not see a TE error code. Check the service guide for your error code.
- You must login to reply
Samsung dw 1E error code, model DW80F800UWS/AA, serial B009g9md604628d This is supposed to be a high temp heating error. Had schematic for DMT800 series dishwasher with me. This wire diagram did not match the wire diagram on the main pcb cover on dw. Did not see thermistor listed on dw wire diagram on unit.
HEating element had 12 ohms, but no power going to it in quick wash cycle. Could not get it into diagnostic mode.
What should I be checking? I am guessing you need to pull the unit to get to components like LG brands?
- AV Repair Help answered 9 years ago
- You must login to reply
Please login first to submit.
