It doen;t cooling on fresh food side, freezer is working fine, the condenser fan and the evaporator fan both are working fine, compressor is working, the pressure in the system is fine, but on fresh food side is not cooling enough. some hel please thank you.
just check the condenser and the evaporator fan if they are working, check the amps of the compressor the amps is fine ,, add a little Freon in the system, but I’m sure is no leak in the system. it has the correc pressure in the system.
- Victor12 asked 7 years ago
- last edited 7 years ago
Hello
You will need to run the unit throgh the diagnostic mode . See directions below. The complete diagnostics will be on page # 83 in the service manual link below. Matt Ace technician
Entering Service Diagnostics:
Enter Service mode by pressing the Water, Crushed, and Cubed buttons simultaneously for 3 seconds.
The display will show Enter Service Mode?
Press Yes. Use the FZ or FF increase/decrease buttons from display to select the appropriate mode. Once the
displays indicate the desired test mode, press any key, except the temperature adjustment buttons, to
run test.
The test mode must be selected within 5 minutes of entering the diagnostic mode. Otherwise, it will
time-out and normal refrigerator operation will resume.
Once a test mode is selected, the display will show the results of the mode selected. Run test 00 16 to exit diagnostics mode and return to normal operation.
The display will show Entering Service Mode.
The display will show 00 in the FZ temperature
display and 00 in the FF temperature display. All
the components will turn off, 3-way valve will go to
home position, dampers will go to closed position,
and the temperature display will fl ash 0 in each of
the FZ and FF displays.
- AV Repair Help answered 7 years ago
- You must login to reply
Please login first to submit.
