THE DRYER IS NOT HEATING. TUMBLES AND BLOWS COLD. HELP! TODD FROM NY
Model Number
WSM2700DAWWW
- Guest asked 9 years ago
I think you will find your problem in the element or thermostat. I would take both with you. Also make sure your vent is clean to prevent any future problems.
- AV Repair Help answered 9 years ago
- You must login to reply
Todd
I would start with 220 volts to the dryer coming in. Your motor will run with 115 volts, the element needs 220 volts. If you have 220 volts to the dryer I would check for continuity at the heater part # WE04X10039 Heater and check your Thermostat WE11X99. We can then proceed forward after you make these checks. Matt Ace technician
- AV Repair Help answered 9 years ago
- last edited 9 years ago
-
THANK YOU MATT. I DID CHECK THE VOLTAGE AT THE WALL AND IN THE MACHINE AND IT IS 220. I CHECKED THE THERMO ON THE BLOWER AND IT HAS CONTINUITY. I WILL GO BACK NEXT WEEK AND PULL OUT THE DRUM AND CHECK THE ELEMENT AND SAFETY THERMOSTAT. THANK YOU MATT FOR THE INFO, TODD FROM NY.
- You must login to reply
Your Answer
Please login first to submit.
