I went out on this unit, the main PCB was making a clicking noise and not cold at all. The PCB is no longer available, so I sent it in for repair. I got it back and found that the compressor inverter was bad. I replaced the inverter. I thought that every thing was good but come to find out that the temperature in refrigerator was good but freezer only at 14 degrees when set to zero. it will not get colder. I replaced thermistor. Is there any way to calibrate. Thanks Ricky.
- Apache Warrior asked 7 years ago
- last edited 7 years ago
Hello
There are a few possibilities that would cause warm temperatures in the freezer that you already have not done.
1) Make sure the evaporator fan motor is running up to proper speed.
2) Maker sure the condenser fan motor is running.
3) Make sure the freezer light is shutting off when door is closed.
4) Make sure there is no frost or ice on the evaporator restricting air flow.
5) Make sure your evaporator has an even frost pattern and is not starved for refrigerant. You may have a small leak in the system . See complete manual links below. Matt Ace technician
- AV Repair Help answered 7 years ago
- You must login to reply
Please login first to submit.
