0
0

Hi Folks,
The complaint on this unit is it is not cooling up to par! This unit has an inverter. According to the home owner the condenser has never been cleaned. Clean the condenser and it seemed to lower the temperature. But the inverter continued to beep. It was an inconsistence pattern of on & off and beeping. Not that familiar with inventers and any information will be greatly appreciated.

Thank you,

Jan
Barney’s Appliance
Palm Bay, FL

Model Number
KSCS25INSS00
What have you tried so far?

I did install a new inverter but I got the same problem. On the new inverter the LED light is not blinking which means all is well. But it isn’t! Still cycling on and off!

0
0

Hi. Sounds like you may have an issue with the main control board. How quickly does it cycle on and off? Is it clicking on and off every couple of seconds? I have seen the main control board cause this issue before. It’s part number W10219463. This part does not look like it is available. The part is back ordered. It may substitute to a different part number. Contact your parts store for more information. Unfortunately, if what I described above is happening there is not a definite way to test this. I have just seen it be a faulty board before. Let me know more information on what the unit is doing.

    • Guest
    • 8 years ago
    Hi Guys They fired me and called Sears. Sears came out the next day which is unusual for them. I did go back and get my inverter and they said Sears said it was the main control board part # 2307037. I think Sears is correct but they decided to purchase a new refrigerator so all is well. It was a learning experience! Thank you Sean and Brian for your assistance. Thank you, Jan Barney’s Appliance Palm Bay, FL
  • Your welcome! Sorry that one didn’t work out better for you. That part number is for the display board. It could be the issue, but more likely that its the main control board with out taking a look at it.
0
0

Hi,
I was just wondering did you replace the inverter control board, and then clean the condenser. If you just cleaned the condenser coils i would wait up to 48 hours so the compressor can cool down. Is the condenser fan motor operating correctly? Does the fresh food section have proper airflow? What are the temperatures in both sections? Some times there may be a communication error between the inverter control and the main control, which would cause one of the controls to start beeping. If you can check these things and get back with me we can proceed to the next step.

Showing 2 results
Your Answer

Please first to submit.