Maytag washer stops at 8 min. door stays locked. The last 3 code are F8-E3 , F3-E1, F9-E1. I replaced the pump it was not working now it drains good. about 2 or 3 loads it stop at 8 min. and will not unlock the door.
replaced pump checked pressure switch and blew through the hose its was clear. checked for suds.
Hi. Sounds you have a faulty pressure switch or control. Make sure there are no holes in the pressure tube. Make sure the drain hose is properly installed and elevated. Make sure the drain ia not causing a siphon. If everything is good i would try replacing the pressure sensor first and then the control. I have attached the tech sheet for you. Try running the auto test mode as well.
Thank You for your help.
- You must login to reply
Please login first to submit.