Checked polarity on outlet, check fuse, checked push start switch all good. There’s no power to the start switch. Only place I have power is on the line feed to timer. I’m thinking a bad timer but unsure
Polarity on outlet, contin. On push switch, checked fuse, jumped door switch, no power to anything but the line feed to timer
- Guest asked 7 years ago
Hi. I have attached the tech sheet for you. Take a look at the wiring schematic. There is a fuse In line with L1. This looks like it will be a red wire. This fuse might be located right next to the terminal block. There are other thermal fuses inside the unit as well, that if faulty would cause the dryer to not start. I would also check your belt switch. There is a troubleshooting flowchart on the tech sheet that may be useful. One common thing on these units is a broken timer knob. It will turn and seem like it is fine, but it will just spin around the timer shaft, not actually turning the timer, so you are always in the off position. I have attached a video for this issue.
- Brian, Ace Appliance answered 7 years ago
- You must login to reply
Please login first to submit.