1
0

The error code uL comes up every time the machine is used even when there is nothing in it. I tried a new rps sensor and didn’t fix the problem. I’m thinking it may be the main board. looking for help with this one.
Thanks, Charley

Model Number
mvwb700bw0
Serial Number
c44970496
What have you tried so far?

replaced part # wpw10178988 sensor

Request Resource Materials
Service bulletins, Any available materials
Washer Maytag
Share
Filter
Sort by: Newest First
0
0

Hi. I have seen bad shocks cause this. Make sure your shocks are good. Push down on the tub and let go, the basket should come back up and stop, it should not bounce. Just like shocks on a car. Also when the tub bearings get bad enough it will cause this error code. You could have a basket that is not floating up for agitation or not floating back down and engaging for spin. The basket could be sticking on the bearing shaft. Also your Hub could be stripped or damaged that connects the basket to the bearing shaft. If all of that checks good then you are only left with either the wiring harness or control board.

0
0

Hi. I have seen bad shocks cause this. Make sure your shocks are good. Push down on the tub and let go, the basket should come back up and stop, it should not bounce. Just like shocks on a car. Also when the tub bearings get bad enough it will cause this error code. You could have a basket that is not floating up for agitation or not floating back down and engaging for spin. The basket could be sticking on the bearing shaft. Also your Hub could be stripped or damaged that connects the basket to the bearing shaft. If all of that checks good then you are only left with either the wiring harness or control board.

Showing 2 results
Your Answer

Please first to submit.