Answered
0
0

Dryer starts and after 2 or 3 minutes all the lights starts flashing everything stops.

Model Number
DV210AEW/XAA
What have you tried so far?

You push the start button it starts up and shuts down after 2 or 3 minutes and the all the lights start flashing. I don’t know what error code if any. I don’t have the tech manuel for this machine. Do you have something I can go into diagnotics like a cheat sheet please let me know? Could it be a thermistor or a high limit that went out? Let me know what you think it?

Best Answer
0
0

See fast track sheet below. Other error codes …
TS – lint screen plugged
TO – plugged or restricted vent
BE – stuck button for over 30 seconds .
HE – Invalid heating temperature
FE – Invalid power source , high or low voltage not in range

Hope this helps Matt Ace technician

0
0

Thank you for your question.It could very well be a thermistor or thermostat issue.There should be be a tech sheet inside of machine somewhere if it has not been removed.Absent the tech sheet any thermostat can be tested for continuity with an ohm meter.You also can check the heating element for continuity as well.Please look for tech sheet for diagnostic information otherwise check any thermostat and heating element for continuity and we can continue further after you obtain results of your testing.I have uploaded a link to several Samsung dryer repair videos for you.Good luck.

Showing 2 results
Your Answer

Please first to submit.