0 votes
37k views

Need error codes and diagnostics for this LG DRYER …Thank you in advance

  • Harry P. asked 9 years ago
  • last active 8 years ago
0 votes
31k views

Have LG refrigerator with ER 1F code. Fan motor for icemaker runs then shuts off.
Has anyone ran into this problem?

  • RANDOLF APPLIANCE SERVICE asked 9 years ago
  • last active 8 years ago
1 vote
16k views

The refrigerator was not running. I look at the main board and observed the green light on the board blinking 6 times continuously after 3 seconds it blinks 6 times continuously. is it an error code or what. The tech sheet said nothing about the blinking light on the main board.

  • bill8321 asked 7 years ago
  • last active 7 years ago
0 votes
14k views

My question has nothing to do with the specific model number of above. A coworker and I changed out a bad compressor. It ran for 2 days, then stopped. We were discussing our problem with other techs. One of the other tech asked us how we filled the new compressor with freon. We told him that we filled it with liquid on the low side line like we always do.
He said that we improperly filled the compressor and thus, broke it. He told us that the only way to properly fill a compressor is liquid on the high side and vapor on the low side. Now, we have made over 25 compressor change outs, and never had a problem.

What is the “only” or is there an “only way to fill a compressor?

0 votes
11k views

Model number LFX25991ST/06 What position is the refrigerant valve in when the refrigerator is unplugged? I want to pull a vacuum and I know the Whirlpool you have to use diagnostic mode to open the 3-way valve. Is that the case with
the LG?

  • Tim O. asked 9 years ago
  • last active 9 years ago
0 votes
8k views
  • halco1242 asked 7 years ago
  • last active 7 years ago
0 votes
7k views

I have a customer that wants me to convert his LG dryer to LP. It is an LG model # DLG3171. I typed this number into your model # guide, with no results. I checked PartsPro website and that number came up. So I know that it is a good number. Do you have a video for this model # or something close to it showing how to take it apart? And 2, how long should a job like this take?
Thank you
Bob

0 votes
7k views

HI FOLKS,

I AM GETTING THE ERROR CODE ER RF. THIS PERTAINS TO A FAN IN THE UNIT BUT WHAT FAN? THERE ARE THREE. I INTENED TO CHECK IT FROM THE MAIN BOARD NEXT WEEK BUT I WANT BE ON THE CORRECT PATH. ALL INFORMATIOIN GREATLY APPRECIATED.

NOTE: UNDER THE BRAND NAME I COULD NOT INSERT LG.

THANK YOU,
JAN
BARNEY’S APPLIANCE

  • Guest asked 8 years ago
  • last active 8 years ago
0 votes
7k views

Water leaking to pressure switch area through black hoses.
I dried the area and AE back again.
When I opened door I saw water being directed to front of door on ledge from water input.

  • Guest asked 7 years ago
  • last active 7 years ago
0 votes
6k views

The ice and water dispenser buttons are stuck and not working, do I have to replace them individually? Haven’t got it apart yet to see if maybe it’s all one assembly I can order.

0 votes
6k views

Lg refridgerator LMXC23746D/00. Compressor is cooling in both the fridge and freezer but fans not running. Fans run while in the test mode when the control board button is hit

  • Budgetjohn asked 6 years ago
  • last active 6 years ago
0 votes
6k views

I would like to know how to put this refrigerator into test mode, some video for wach it thank you for the help.

  • Victor12 asked 7 years ago
  • last active 7 years ago
0 votes
6k views

This unit is stopping in the middle of it’s wash cycle with an “ee” error code. Any ideas on what it is before I get there to diagnose?

0 votes
6k views

CAN YOU PROVIDE STEP BY STEP ,LG REFRIGERATOR REMOVE THE FROUNT PANEL SO I CAN CHANGE THE DISPENSER SPRING,DOOR CHUTE,

0 votes
6k views

Can you give me some help, I would appreciate it.
First let me tell you, my dryer is completely apart! When the dryer was put on “Time Dry” it did not dry the clothes. It at first got slightly warm. And then went thru the whole time without drying the clothes.
What would you consider the most likely part(s) to be ? And how would I go about testing the component(s) with VOM?
Thanks for your help and time, Rich.

  • Guest asked 9 years ago
  • last active 9 years ago
0 votes
5k views

Error and diagnostic codes.

0 votes
5k views

The door on my LG refrigerator just slams shut.

0 votes
5k views

Hi,
I looked at the titles of repair videos in your list. There are 3(I think) available LG Dryer repair videos that may be the issue, but the model number is different from mine……
1) Does that make a difference?
2) Do I have to purchase each video to find out how to fix it?
3) How can I tell which video will address my dryer’s problem?
4) I saw video titles for other brands of dryers (GE, Samsung, etc). Are the different brands and models so different from mine that one won’t apply to the other?

  • MargeH57 asked 6 years ago
  • last active 6 years ago
0 votes
5k views

My LG washer keeps displaying an error code and i don’t know what it means.

0 votes
4k views

Why Is our fridge getting condensation on the left outside wall? How can we solve this problem?V

  • bill woodhouse asked 9 years ago
  • last active 9 years ago
0 votes
4k views

Does anyone have LG part number ADJ36834101?
This is the ice maker fan assembly located in the freezer. NLA, discontinued.
Does anyone have another way to repair this fan? lg ref model LFX23961ST, serial 809MRLM09256. Looking for ice room fan assembly located in the upper left corner of the freezer grill.

0 votes
4k views

We replaced an ice maker in their friigde the the tip of the water line froze like a month later then we installed a new piercing shutoff valve and the line froze two weeks later.

Wanting to know if LG has any s rvice updates for such a problem.

  • halco1242 asked 7 years ago
  • last active 7 years ago
0 votes
4k views

I have a LG dryer LG DLE1001W Electric Dryer. I keep getting these different error codes. TE error code, HS error code, U error code, D error code.

0 votes
3k views

I checked the control it seems ok, so I’m assuming it’s the touchpad. Do you guys have some part information there you could pass along for this? Thanks.

0 votes
3k views

Any hints on where can get similar spring spreader tool like LG 383eer4004a? Thanks

  • Randy W asked 9 years ago
  • last active 9 years ago
1 vote
3k views

I STEEL HAVE PROBLEM REPLACED NEW COMPRESSOR AND MAIN PCB.I DID 3 TEST AND I DON,T HAVE ANY ERROR CODE.I FOUND OUT WHEN I PUSH ICE COLD MY COMPRESSOR RUNING AND I HAVE 320 V0LT AND DROW 1.6 AMP LOW SIDE PRESSURE IS -10PSI AND HIGH SIDE( DRYER)73PSI.RUNING 30 MINUTS AND I LIKE TO KNOW DO I HAVE BAD INVERTER BOARD NEED TO BE 80 TO 180 VOLT OR IS FREEON LOCK I DON,T HAVE GOOD FLOW HIGH SIDE IS TOO LOW PSI?

  • matteo asked 6 years ago
  • last active 6 years ago
0 votes
3k views

Ice fan not sure if it is working? Send me a diagnotic sheet on this refrigerator so I can test functions on the computer board.

  • Guest asked 7 years ago
  • last active 7 years ago
0 votes
3k views

Unit not draining. Tried the drain pump and still no drain. 110v coming from both lines (separate readings) to drain pump. Thinking it does not have common. Believe it is the board. Looked on older USB and not their. Anyone have some info on this unit. Thanks in advance

0 votes
3k views

Fan not blowing in either compartment. Pushed the test button, all led lights lit up on display, fan was blowing in both compartments. Fridge does hum, but after the test, a clicking noise from compressor area, then nothing.

  • Andrew Johnston asked 9 years ago
  • last active 9 years ago
0 votes
3k views

Does anyone have the diagnostic codes or troubleshooting information for this model ?

  • Dan Goodard asked 9 years ago
  • last active 9 years ago
Showing 1 - 30 of 905 results