Answered
0
0

Hi, my dishwasher randomly came on with a blinking clean light. I watched your informative video on how to reset the codes on other whirlpool dishwashers, mine however doest have the same button setup, and am curious if you know the button combination to reset mine. Ive inspected to element and put a multimeter on it to read the ohms, this checks out as fine. any help would be much obliged.

-bill

Model Number
dp1040xtxb0
Best Answer
0
0

Hi William, If you have tested your heating element, and it has continuity, in most cases what has failed is the control board. But FIRST, I would make sure that there is nothing stuck in the drain and holding up the impeller. If this checks out, then, we are back to the main control. There is a test you can do to confirm this.
Try pushing the heat dry and then normal back to back three times and then start as usual. This should clear the problem. It is only a temporary fix as the error will most likely return. Attached is a link to the control board.
Thanks, Tony-AceTech52

Showing 1 result
Your Answer

Please first to submit.