The normal light flashing, and only the normal and cancel fonction ,i Check the element ok, the drain pump ok, door lock switch is ok , fuse ok . What is the problem.
Model Number
Kudicrbs1
Request Resource Materials
Videos
- Guest asked 6 years ago
Hello
See the complete technician diagnostics link below.
To invoke the Diagnostics Cycle, perform the following key presses in less than 6 seconds while in standby:
Heated Dry ➙ Normal ➙ Heated Dry ➙ Normal Alternative entry method if user interface is not functional: Unplug thermistor or OWI sensor 2 times while user interface is unplugged (no IDsor keys present).
- To rapid advance one interval at a time, press the Start/Resume key.
- Invoking Service Diagnostics clears all status and last ran information from memory and restores defaults; It also forces the next cycle to be a sensor calibration cycle.
Calibration cycles begin with a “sensor check” to determine whether the dishwasher has an OWI soil sensor or not. If the control detects an OWI, it forces two rinses to occur prior to Final Rinse (to assure clear water), then calibrates the OWI during the final rinse.
Video Link
- AV Repair Help answered 6 years ago
-
I unplugged the owi 2 times and unplugged the interface , after that I press the start button and he start , the washing light go on , after the drying light go on and after that no light on the bord but the dishwasher still running and do all the cycle (more than 1 hour) . This morning ,I press any button on the board and no light ,nothing happen. I close th breaker , nothing I check the fuse on the control panel Ok I close the breaker ,unplugged the the interface (touch pad)put on the breaker ,close the breaker and plugged the interface. Nothing on the touch pad , no light go on. Thank you Stéphane
-
I
-
From your explanation of the issues you are having it sounds like you have a shorted keypad (user interface) User interfaces are very common to go bad on these types of dishwashers due to the moisture that is associated with the area. If the buttons are not all responding correctly 99 times out of a 100 its the user interface.
- You must login to reply
Hello
Can you verify your model number #Kudicrbs1. We cannot find anything close in our system that matches your model.
Thanks Matt
- AV Repair Help answered 6 years ago
-
Model kudi02crbs1. Diswasher kitchenaid whisper quiet 2011
-
Got it thanks , will get back to you shortly.
- You must login to reply
Your Answer
Please login first to submit.
