0
0

The door strike is ok. The Reed switch is okay. There is no continuity at J2 . The harness wires are good.
Do I need to check the wax motor.
I changed the door switch with a new one. Still the same. Lock error.
Is it the electronic control?
How could there be continuity at J2 with the door shut?

Model Number
GLTF2940ES0
Request Resource Materials
Service diagnostics guide, Service bulletins, Service pointers, Job aids, Videos, Any available materials
0
0

Hello
See service manual and wiring diagram links. If you have already replaced the door lock then your issue must lie within the main PCB assy. Part# 137006000. If you are testing from pins on the J2 connector you are supposed to have continuity when the door is closed. The circuit will break when the door is opened.

Showing 1 result
Your Answer

Please first to submit.