i am getting a sud error
i blow out the sensor and the house but it didn’t help.
the customer also said that she is getting an f35 error as well but i was not able to get that far in the cycle
- Guest asked 8 years ago
Ok. The F35 error is an error code for the pressure switch. You have already checked that the pressure hose is not clogged by blowing through it. Make sure there are no holes in pressure tube. Make sure the customer is using HE detergent and the washing machine is not getting too many suds in it. They had some sort of issue with the Pressure sensor on these units. This is most likely your issue. First check the connections. It could also by an issue with the control board(CCU). Not a real good way to find out which is bad, but more than likely it is the sensor. I found some info on getting the correct part. …………
There are 2 different parts that is available – one is W10415587-must call wpl w/ model to get correct part # USE W10415587 for WFW9700VW00, WFW9700VA00, MHWE500VW00, MHWE500VP00,
It looks like according to this you will need p#W10415587 . Attached is a repair video.
- Brian, Ace Appliance answered 8 years ago
-
hi so i changed the Pressure sensor and i am still getting SUD and f35
-
If your pressure hose is good and there is not an excess amount of suds, then it must be the control board.
-
hi can u please give me a part number?
-
W10175764 is the part number, but no one shows it in stock. Everywhere says it is no longer available.
- You must login to reply
Please login first to submit.
