All Answers

Hi. I have attached the service manual for you. On page 25 it has troubleshooting for the dryer not starting. On page 28 it has error codes in the diagnostic mode. Follow the troubleshooting section for no start and see if you are able to enter the diagnostic mode to find and stored error codes.

Hi. Buzzing and clicking noises are going to be normal with induction cooktops. You will hear the clicking of the relays on the control boards and you will hear the buzzing of the elements heating up the pans. You will get different results with different pans. For example, a cast iron pan may not make as much noise due to its density. You can get buzzing noise on both low and high heat settings as well. As long as the unit is working properly and it has always made this noise I would assume it is fine.

I have attached the service manual for you dishwasher. All information available is in this attachment

I have attached the service manual for you. No other information found. Please follow service manual as it is the source for the information you seek.

Hello, see links below for the technician diagnostic sheet,parts, and video.
-Matt Ace technician

Hello, see links below for the technician diagnostic sheet,parts, and video.
-Matt Ace technician

Hello, see links below for the technician diagnostic sheet,parts, and video.
-Matt Ace technician

Hello, see links below for the technician diagnostic sheet,parts, and video.
-Matt Ace technician

Hello, see links below for the technician diagnostic sheet,parts, and video.
-Matt Ace technician

Hello, see links below for the technician diagnostic sheet,parts, and video.
-Matt Ace technician

Hello, see links below for the technician diagnostic sheet,parts, and video.
-Matt Ace technician

Hello, see links below for the technician diagnostic sheet,parts, and video.
-Matt Ace technician

Hello, see links below for the technician diagnostic sheet,parts, and video.
-Matt Ace technician

Hello, I have attached the tech sheet with complete and detailed diagnostic and corrective procedures along with wiring diagram. It is the most up to date and complete information available .

Hello, see links below for the technician diagnostic sheet,parts, and video.
-Matt Ace technician

Hello, see links below for the technician diagnostic sheet,parts, and video.
-Matt Ace technician

Hello, see links below for the technician diagnostic sheet,parts, and video.
-Matt Ace technician

Hello, see links below for the technician diagnostic sheet,parts, and video.
-Matt Ace technician

Hi. The model number you provided is not valid. I did find a service manual with part of your model number. The 1E error code is a water level error code. It states:

Water Level Sensor Trouble. (When the input signal from the water level sensor is out of range, the unit will send out beeping sounds and halts the cycle.) Go to “No Water Fill”Troubleshooting Section page 14

This could be an issue with the control, the pressure switch or pressure hose. I have attached the manual for you. Go to the no water fill section on page 14 to find out what the issue is.

Hello, see links below for the technician diagnostic sheet,parts, and video.
-Matt Ace technician

W10317476 Fits the Following Appliance Models
KDRS505XSS00 KDRS505XSS01 KDRS505XSS02 KDRS505XSS03 KDRS505XSS04 KERS505XBL00 KERS505XBL01 KERS505XBL02 KERS505XBL03 KERS505XBL05 KERS505XSS00 KERS505XSS01 KERS505XSS02 KERS505XSS03 KERS505XSS05 KERS505XWH00 KERS505XWH01 KERS505XWH02 KERS505XWH03 KERS505XWH05 KERS507XSS00 KERS507XSS01 KERS507XSS02 KFDD500ESS00 KFDD500ESS01 KFDD500ESS02 KFED500EBL00 KFED500EBL01 KFED500EBL02 KFED500ESS00
KFED500ESS01 KFED500ESS02 KFED500EWH00 KFED500EWH01 KFED500EWH02 KFID500ESS00 KFID500ESS01 YKER507XSS00 YKER507XSS01 YKER507XSS02 YKER507XSS04 YKFED500ESS0 YKFED500ESS1 YKFED500ESS2 YKFID500ESS0 YKFID500ESS1