All Answers

Hello
See the service manual link below. Go to page #14/ 15 for display panel operation. I am not sure what flashing light or beeping codes you are getting. It could be door High temperature, Door open alarm, power up alarm. You can deactivate alarms and reset. You will need to go throgh diagnostics in the manual below to verify temperatures and other possibilities. Matt Ace technician

Alarm Off Pad
Turns off alarm signals. See Alarms section to interpret alarm signals.
1. Press and hold Alarm Off pad for 3 seconds to deactivate Door Open alarm. To reactivate Door Open alarm, press and hold Alarm Off pad for 3 seconds.
2. If Alarm Off pad is pressed and condition causing alarm is not corrected, alarm will reset.

Display Panel Operation

1) Keyboard Pad Functions Entry Tone
Indicates a pad was pressed, command read and accepted. Turn off entry tone by pressing and holding Display On pad for 3 to 5 seconds. Command Accepted Tone Three short tones indicate command accepted.

Display On Pad
1. Activates control panel. Control panel remains active at least 10 minutes. 2. Turns off Power Up Alarm (flashing lights) after power is first plugged in or after power outage.

Note: All pads, except Alarm Off, are inactive
until Display On is pressed.
Freezer Temp Pad
Activates freezer temperature setting mode.

Freezer indicator light will glow. Freezer
temperature setting will be displayed.
Factory setting is 5.
2. Change freezer temperature setting by
pressing Higher Temp or Lower Temp Pad.
Ref Temp Pad
Activates refrigerator temperature setting mode.
1. Refrigerator indicator light will glow.
Refrigerator temperature setting will be
displayed. Factory setting is 5.
2. Change refrigerator temperature setting by
pressing Higher Temp or Lower Temp Pad.
Higher Temp Pad
Raises temperature setting one bar at a time. If
entry tone is on. Tone will sound at each bar
level until top level is reached.
1. Turn on temperature setting function of
control panel by pressing Higher Temp Pad.
2. Press and hold Higher Temp pad to raise
temperature setting at a faster ra

See links below for the technician mode and complete troubleshooting service manual. You must be logged in to get to the manual links.

See links below for the technician mode and complete troubleshooting service manual. You must be logged in to get to the manual links.

See links below for the technician mode and complete troubleshooting service manual. You must be logged in to get to the manual links.

See links below for the technician mode and complete troubleshooting service manual. You must be logged in to get to the manual links.

See links below for the technician mode and complete troubleshooting service manual. You must be logged in to get to the manual links.

See links below for the technician mode and complete troubleshooting service manual. You must be logged in to get to the manual links.

See links below for the technician mode and complete troubleshooting service manual. You must be logged in to get to the manual links.

See links below for the technician mode and complete troubleshooting service manual. You must be logged in to get to the manual links.

See links below for the technician mode and complete troubleshooting service manual. You must be logged in to get to the manual links.

See links below for the technician mode and complete troubleshooting service manual. You must be logged in to get to the manual links.

See links below for the technician mode and complete troubleshooting service manual. You must be logged in to get to the manual links.

See links below for the technician mode and complete troubleshooting service manual. You must be logged in to get to the manual links.

See links below for the technician mode and complete troubleshooting service manual. You must be logged in to get to the manual links.

See links below for the technician mode and complete troubleshooting service manual. You must be logged in to get to the manual links.

See links below for the technician mode and complete troubleshooting service manual. You must be logged in to get to the manual links.

Hello
See technical service and daignostic links below. I would start with making sure you have the correct water pressure into the ice maker. Low water pressure will cause small ice cubes and jamming issues. Another thing to look for is the correct ice maker. Whirlpool now has a replacement ice maker kit using a Whirlpool module ice maker, wiring harness and an instruction sheet is now available to order. Order a replacement ice maker kit part# W10519364 using normal parts ordering procedures. Follow the detailed instruction sheet when installing the replacement ice maker. see links below.

See links below for the technician mode and complete troubleshooting service manual. You must be logged in to get to the manual links.

See links below for the technician mode and complete troubleshooting service manual. You must be logged in to get to the manual links.

See links below for the technician mode and complete troubleshooting service manual. You must be logged in to get to the manual links.