All Answers

See links below for the technician mode and complete troubleshooting service manual. You must be logged in to get to the manual links.

See links below for the technician mode and complete troubleshooting service manual. You must be logged in to get to the manual links.

See links below for the technician mode and complete troubleshooting service manual. You must be logged in to get to the manual links.

These are some links that may help.

Hello
The DE error code is a lid switch error. LID is opened in the course of intermittent spin, normal spin or processing cycle. Go to page #31 in the manual link below for more detailed information. The lid swwitch comes as a complete assembly if needed. Matt Ace technician

**** Correction *****
1) Check the connections to the lid switch and at the WHITE 6-pin connector at the main board.

Here are some links that may help below.

Below are some links that may help.

Here are some links that may help.

Hello
See the complete diagnostic and troubleshooting guide links below. I would start on page #49 and go throgh the diagnostics .There are many possibilities with your symptoms. Matt Ace technicain

6-1) If power is not ON ···································50
6-2) If the compressor and cooling fan motor don’t work normally ··········51
6-3) If defrost function ··································· 52
6-4) If there is a trouble with self-diagnosis ······················· 53
6-5) If alarm sound ·····································54
6-6) If the panel PCB is not working normally ······················56
6-7) If fan doesn’t work ···································57
6-8) If CoolSelect ZoneTM isn’t operated normally (RS267LA, RS269LA) ··········58
6-9) If the lamps of freezer / refrigerator fail in lighting: ················59
6-10) If Crushed Ice/Cubed Ice doesn’t wo

Hello
What we have seen is this symptom is caused by a starved evaporator / Sealed system issue starting. Is the unit freezer getting normal freezer temperatures ? You should be -5 degrees to +5 degrees. If you are not sure put in a pint of ice cream and see if it stays solid for 24 hours. Ice cream needs +5 degrees to stay solid. There is one service bullitin link below that coud cause this issue also with Condensation/Frost on the Ice Maker Fascia ( Service bullitin ) . See technician manual and all bulliten links below. Matt Ace technician

Hello
Please see the links below for the complete technician training manual. Matt Ace technician
How to enter into — SERVICE MODE
Press the following button sequence to enter
service mode: SIGNAL; EXTRA RINSE; SIGNAL;
EXTRA RINSE.
Press the same button sequence to exit service
mode: SIGNAL; EXTRA RINSE; SIGNAL; EXTRA
RINSE.

See links below for the technician mode and complete troubleshooting service manual. You must be logged in to get to the manual links.

See links below for the technician mode and complete troubleshooting service manual. You must be logged in to get to the manual links.

See links below for the technician mode and complete troubleshooting service manual. You must be logged in to get to the manual links.

See links below for the technician mode and complete troubleshooting service manual. You must be logged in to get to the manual links.

See links below for the technician mode and complete troubleshooting service manual. You must be logged in to get to the manual links.

See links below for the technician mode and complete troubleshooting service manual. You must be logged in to get to the manual links.

See links below for the technician mode and complete troubleshooting service manual. You must be logged in to get to the manual links.

See links below for the technician mode and complete troubleshooting service manual. You must be logged in to get to the manual links.

See links below for the technician mode and complete troubleshooting service manual. You must be logged in to get to the manual links.