All Answers

I have attached a couple of videos on GE washer error codes and diagnostic procedures.

This is a communication error between the control and the motor. There is a way to reset motor and i have attached a couple of videos on error codes and diagnostic procedures on this washer.

I am confused on your question. I have provided a job Aid link along with a technician sheet and parts breakdown. I do not know what ( CB) is ?

Hello
See requested information links below. Matt Ace technician

Hello
The model number is not correct. Can you check it please.

They tend to stick the wiring on the bottom or back of the lower drawer. At any rate, it cannot be a thermal fuse, or both elements would not work, as this interrupts L2. If you check at the clock where the Bk/ Br terminals are, you will probably see that the relay is open on the control. This simplifies things when you have to start tracing. A diagram would not make a lot of difference this way. See video link below Hope this helps

Hello
See links below that can help troubleshoot your issue. Matt Ace technician

If the motor board is indicating normal stand by mode and the timer advances with the drain pump operating at the proper intervals this should be a lid switch issue. There is a mini manual in an envelope attached to the back of the control panel with technical info as well.

Thank you for your question, watch the video linked blow, it should help

We have a video that steps you through this very issue. View the video linked below

Hello
See Technician sheets and Job Aid sheet along with video links below. Matt Ace technician

Hello
See technician link below. This sounds like A weak igniter not getting the proper millivolt ratings to the gas valve. Change the igniter and you have a 95% chance this will rectify the issue.

Matt Ace technician

We have a video that steps you through this very issue. View the video linked below

Hello
See links for parts, technician diagnostics , owners manuals & video . Matt Ace technician

Hello
See videos and technician sheet for RS25 series refrigerator. Matt Ace technician

Hello
See technician sheet link below along with videos. Matt Ace technician

Hello

       See technician sheet and Job Aid links below. Matt Ace technician 

Hello
Please double check your model . Its not correct.

Hello
See information links you requested below including videos.

Matt Ace technician

Hello
See technician diagnostics and four service pointer links below. Matt Ace technician