All Answers

That error code indicates a bad thermistor. Here is the part number. DC32-00010C. Below is a link to the repair video.

This sounds like you may have an issue with the Noise filter. Here is the part number. DC29-00024A. Below is a link to the repair video.

The issue could be with the control panel. Here is the part number. DC97-21544J. Below is a link to the repair video.

You may need to replace the drum assembly. Here is the part number. DC97-21456B. Below is a link to the video for the repair.

This sounds like an issue wit the sump and motor assembly. Here is the part number. W10805015. Below is a link to the repair video.

This could be an issue with the diverter motor. Here is the part number. W10537869. Below is a link to the repair video.

Hello
Are you getting any error codes on your display ? Go to page #26 in the troubleshooting link below for your model. Go down the page to number #19 through #24 . These error codes , symptoms and corrections are listed for your issue. There are a few possibilities of failed parts.
* Hall sensor defective
* Motor auto drawer connection or bad motor
* Auto drawer module connection issue or defective Auto drawer module
* Redd switch connection issue or defective reed switch

All of the diagnostics are in the 102 page manual along with schematics and parts breakdowns.

This sounds like a bad heating element. Here is the part number. W10703867. Below is the link to the repair video.

This sounds like the drain pump burned out. Here is the part number. W10914557. Below is the link to a repair video for the drain pump.

This sounds like an issue with the Stator Assembly. Here is the part number.AJB73816001 Below is a link to the repair video.

This could be a bad High limit thermostat. Here is the part number. WPW10195091. Below is a link to the repair video.

This is likely an issue is likely a bad water inlet valve. Here is the part number.W10872255. Below is a link to the repair video.

This sounds like you have a better blower assembly. Here is the part number. W11228135. Below is a link to the repair video.

The dispenser likely needs to be replaced. Here is the part number. W10861000. Below is a link to the repair video.

This is likely an issue with the door switch. Here is the part number. WPW10569603. Below is a link to the repair video.

Hello
On page #26 in the service manual guide link below will show you the corrective measures for you E3 error code. The possible causes for the error are :
1) Wash motor failure
2) Hall sensor failure

This sounds like you have a bad door latch. Here is the part number. WPW10653840. Below is a link to the repair video.

That sounds like a bad Electronic control. Here is the part number. W11087217. Below is a link to the repair video.

This sounds like a bad door boot. Here is the part number. DC64-03788A. Below is a link to the repair video.

This sounds like you have a bad heating element. Here is the part number. DC47-00042A. Below is the link to a repair video.