0 votes
5k views

I have a frigidaire double oven. I went to clean it and got an f8 error. I hit clear and the error went away but I can’t do anything with my oven. I turned off the breaker to the oven and let it sit. Turned it back on and the oven says locked, but it is not and it wont do anything

0 votes
2k views

I have a Frigidaire double oven. I went to clean it and got an f8 error. I hit clear and the error went away but I can’t do anything with my oven. I turned off the breaker to the oven and let it sit. Turned it back on and the oven says locked, but it is not and it wont do anything.

0 votes
1k views

The ice maker produces plenty of ice, but after about only about 4 days the unused cubes form a solid block in the bin that must be removed and melted in the sink. Why is this happening? My refrigerator is a model FRT21FD3A

1 vote
2k views

I am having trouble repairing this stackable.

The issue is due to the washer cycle not going through all the way. Initially the error code said a lid switch fault a couple months ago. We replaced the lid switch a few months ago and worked fine, then the issue popped up again which the control board was replaced. Now the washer will go into the cycle not draining and the lid is still locked and not opening. We replaced the actuator, both the control panel board and the washer main board and lid lock. I am unsure on what else the issue could be as no error codes pop up and this will only happen intermittently.

  • Guest asked 6 years ago
  • last active 6 years ago
1 vote
2k views

Service Manual ?

  • Guest asked 6 years ago
  • last active 6 years ago
0 votes
2k views

I have an Frigidare Affinity front load dryer giving the error EF2. I was checking it since the steam refresh cycle seems to not be releasing any steam. Would you be able to tell me what the error code references? Thank you.

0 votes
2k views

This standalone freezer is not getting power to the compressor. Turned the defrost timer and still nothing. Not sure how to test the timer. Or test the cold control

  • Guest asked 6 years ago
  • last active 6 years ago
0 votes
2k views

The Frigidaire front loading washer will not spin. it let in just a bit of water and then nothing happens. ive unplugged it and checked that the water supply hoses are not clogged. what do i do next?

0 votes
2k views

My Frigidaire dishwasher modle number FDB1500LFS0 will not start. The heat dry lock light is on but whatever button I press for what cycle or to start will not light and the washer will not start. When I shut the door you can hear it click so I think it locks shut fine. What should I try?

0 votes
2k views

My Frigidaire FDB750RCC1 dishwasher does not wash. It only fills and drains. This occurs on all cycles (pots & pans, normal, and light). I have cleaned the filter backet and checked the impeller. Twice, after shutting the door, the wash cycle began. It no longer begins. The timer does not seem to hang up.

0 votes
2k views

My dishwasher is showing an ER response on the digital readout…It will not allow me to cancel out the normal wash to return to no readout on the readout. It keeps telling me to add spot additive; I did this, but it keeps blinking. It makes a running sound and says washing/drying, but nothing is happening.

0 votes
2k views

WE HAVE A STACK UNIT WHERE THE WASHER WILL NOT START, NO TECH SHEET

  • Guest asked 6 years ago
  • last active 6 years ago
0 votes
1k views

Will I Damage a Refrigerator or Freezer If I Store It in the Garage?

0 votes
2k views

Frigidaire Dishwasher GLD2440REQ1 the display show CL even after starting a cycle. Then a minute or two later the display flashes 96 and CL very rapidly. This just started a couple of days ago.

0 votes
2k views

Standard S/S unit, that on the freezer side will ice up around the ice maker and the ice bucket. (Looks like the snow cone ice when a defrost heater goes bad just around the icemaker area). I have replaced the door seal, the ice door flap and part with it. I am at a loss hear, as h/o swears door is not being left open. Only thing I know it this point is maybe the door insulation is bad and needs another door? Any ideas?

  • Guest asked 6 years ago
  • last active 6 years ago
0 votes
1k views

My Frigidaire range stove burner not shutting off,I changed stove burner switch but still the same problem.

0 votes
2k views

My Frigidaire Fridge Model LGUB2642LF2 is having problems with the internal lighting. Both upper fridge and lower freezer lights all went out at the same time. Have removed the lights and tested with a continuity tester and they are good. Also, one of the upper lights appears to have melted the roof of the Fridge open from what appears to be excessive heat. What would be the most probable cause for them to all go out at the same time? Have snapped the switches for all the doors and no result.

0 votes
2k views

When I set the selector know on normal or anthing but Delicate or Rinse None of the LEDs for the water temperature selections or the spin speed will come on. ONlY a beep is heard. When I press start the washer comes on, will rotate to sense the clothes but then the sensing light goes out and it doesn’t fill. Why would it do this and will fill and let me select on delicate or rinse?

I need a tech sheet and any video what might help

  • Guest asked 6 years ago
  • last active 6 years ago
0 votes
2k views

It does display system diagnostics. Numbers 2 thru 47 but will not show 52c- 63c per the tech sheet instructions.

  • Guest asked 6 years ago
  • last active 6 years ago
1 vote
2k views

Water wont drain all way out of tub just stays in tub..When its trying to drain I can hear something making like a rattling noise and I can tell the pump is trying to work..

  • Guest asked 6 years ago
  • last active 6 years ago
0 votes
2k views

Freezer is not cold enough to keep frozen, FF side is fine on temp keeping food cool. I can hear the compressor click to try and come on but it doesn’t continue to run. What can cause this?

0 votes
2k views
  • Guest asked 6 years ago
  • last active 6 years ago
0 votes
2k views

THIS FRIGIDAIRE FRONT LOAD DRYER, MAKES NOISE, AFTER I HAS ALREADY STARTED WORKING. SOME TIME SILENT OUT, SOME OTHER TIMES, MAKES NOISE UNTIL YOU STOP IT. IT’S ALSO VERY HOT AT BACK OF THE DRYER. THE ELECTRICAL PLUG MODE HORNETS, WERE BURNT, SOME HOW.

  • Guest asked 6 years ago
  • last active 6 years ago
0 votes
2k views

The unit runs fine till the end then it doesn’t drain and the two LEDs blink. If I unplug it eventually it will clear and repeat the same problem. Any Ideas?

  • Guest asked 6 years ago
  • last active 6 years ago
0 votes
4k views

We attempted to repair this machine but will not respond whatsoever. It will beep when pressing the control panel buttons but will not start the cycle. We reset the stackable and the same thing occurs. We also tried replacing the lid switch and main board with no change. We also attempted to put it into service mode in order to look up the error codes in which the stackable would still not respond. Do you know of anything else that could cause this issue? The stackable will just beep three times which we thought to believe would be the lid switch.

  • Guest asked 6 years ago
  • last active 6 years ago
0 votes
2k views

The ice maker dispenser doesn’t work all the time.

  • Guest asked 6 years ago
  • last active 6 years ago
0 votes
2k views

The thermistor on the ice maker was ripped off and it shorted out the control board. The unit was completely dead and there was a visible short on the board. I replaced the board and the ice maker and the refrigerator resumed normal function besides the ice maker not producing ice, and water is pooling up in the bin. Not sure if the short could have shorted out the water valve too or not.

  • Guest asked 6 years ago
  • last active 6 years ago
0 votes
2k views

If you weeks ago they received the SYEF error code.
I changed the fan and it was working fine.
Now the temperature rises in the freezer 221 degrees or 18 the stuff are cold the freezer is not full but the temperature keeps on adjusting.
Please advise

  • Guest asked 6 years ago
  • last active 6 years ago
0 votes
2k views

Never had to replace one of these motors just need a video so I have some idea where to start. Thank you for your help.

  • Guest asked 6 years ago
  • last active 6 years ago
0 votes
2k views

There was a field change on the freezer section ice maker to keep the water chute from icing up. It was some kind of insulator I assume, but it shriveled up to uselessness and needs replaced. I cannot find the part from the diagram. Ice builds up and causes the water to be partially diverted. Where can I find these and how do I get modifications on various appliances.

  • Guest asked 6 years ago
  • last active 6 years ago
Showing 91 - 120 of 395 results