Brand: Electrolux

My washer is leaking water out of it

Can you tell me what could be causing this issue on a Electrolux Refrigerator? It is having these problems: No defrost or partial defrost

my electrolux washer will not start the cycle.

The ice in my freezer will not freeze all the way

My washer is not cleaning my clothes properly.

Hello I have a question on a Electrolux Washer. I’m noticing these issues: Will not run

Not making ice

My Electrolux washer seems to be off balance.

My Electrolux Refrigerator drawer will not open.

Ice dispenser not working properly.

My Refrigerator is not cooling properly.

I checked the cut off thermostat and we’re good. I also replace the relay control board on the back of the unit. I also noticed that the convection fan wouldn’t turn on. There’s power to the display board and it responds pretty good.

Keeps displaying an error code and i do not know what it means.

Having an issue with a Refrigerator

Not cooling properly

My refrigerator is not making ice properly.

Refrigerator is no working right

I have an Electrolux Refrigerator that is not working

THE “DOOR AJAR” ALARM KEEPS SOUNDING. IT STOPPED FOR ABOUT A WEEK AND THEN CAME BACK. I CHANGED THE DOOR SWITCH WITH NO EFFECT. THE UNIT IS COOLING WELL AND THE DOOR SHUTS PROPERLY. I’M THINKING IT’S IN THE BOARD. ANY THOUGHTS WOULD BE APPRECIATED.
THANKS

I cannot figure how to access the glass top. Do you have a video that shows how to access control panel and under the glass for the elements?

The ice maker compartment is frozen in the back. Why is this happening. We have changed the ice maker, the new one is still freezing in the back.

Door handle loose how do I check or tighten hardware inside door

THE EVAP COIL HAD A LEAK WHICH I REPAIRED. I RECHARGED THE SYSTEM. I HAVE 0 PSI AT THE PROCESS STUB AND ABOUT A 70 DEGREE DROP ACROSS THE CONDENSING COIL. THE UNIT ISN’T COOLING PROPERLY STILL. THE TEMP DROP ACROSS THE COIL HAS ME STUMPED AS SEEMS TO ME THAT IT SHOULD BE WORKING. ANY THOUGHTS? TX

UNIT HAS “SY CE” ERROR CODE AND WON’T DO ANYTHING. I HAVE NO PAPERWORK ON THIS UNIT. TX

hi i saw the breakdown here but it doesn’t show screws or video. is this pretty straight forward?