Brand: Electrolux

i was wonder if anyone can tell me how to replace the door seal on this unit
item #137066300

My Electrolux washer will not start.

Can you tell me what could be causing this issue on a Electrolux Refrigerator? It is having these problems: No defrost or partial defrost

I have an Electrolux Refrigerator that is not working

Not cooling, Ice crystals.

Clothes will not spin out, banging sounds, boot is torn.

The compressor was bad, so I replaced the compressor about a week ago, and then that one burnt up. I replaced the compressor a couple days ago and the homeowner said that it is not cooling as it should and there is condensation on the food and milk in the refrigerator. If this compressor burns up as well, what could be causing this? And what can I do to fix it?

My Electrolux washer will not fill with water.

the programming starts normally, water and washing works, when it is on the programming to drain the water the pump does not turn off and shows error I30, I have already replaced the board and the same defect continues

It is really loud in it’s final high speed spin. Found the bearing bad and priced it out, but customer doesn’t want to spend that much. Is this normal?

This fridge is completely dead, have 120 at source and 120 at board. Were do I start to figure out what is taking board out.

Hello I have a question on a Electrolux Refrigerator. I’m noticing these issues: Water dripping from dispenser

my electrolux washer will not start the cycle.

THE “DOOR AJAR” ALARM KEEPS SOUNDING. IT STOPPED FOR ABOUT A WEEK AND THEN CAME BACK. I CHANGED THE DOOR SWITCH WITH NO EFFECT. THE UNIT IS COOLING WELL AND THE DOOR SHUTS PROPERLY. I’M THINKING IT’S IN THE BOARD. ANY THOUGHTS WOULD BE APPRECIATED.
THANKS

My customer broke the timer shaft on her dryer. She doesn’t want to replace the timer if I can somehow fix it. The knob and shaft separated from the timer.
I have fixed a customer’s water dispenser on his fridge door by installing a $4.00 door bell push button device. He didn’t care how it looked, he just wanted his water to work.
Is there a way that I can get her timer to work, without buying another $120.00 plus timer.

Not cooling, Leaking water, Frozen items in freezer melt.

The dryer powers on but doesn’t start. Pressing the start button gives 3 beeps almost like the door isn’t closed. I put the dryer into test mode and all I get is error code EHd, this doesn’t appear in any diagnostics codes anywhere. The control panel appears to be responsive. None of the error code sheets show this error code.

There was a large amount of lint being blown out the back of the dryer and I cleaned out the outlet. I’m about to take apart the bulkhead to get to the blower and vacuum that out too.

I need a tech sheet and if this sounds familiar please advise.

The soap dispenser is not working on my Electrolux washer.

Is there some trick to getting these bellows on in a timely fashion? I am having a hard time with this one and can’t seem to get it. It’s making me think I should know better but missed that day in class. Any tips for me?

I put my temperature probe into the fridge, it read 53*. The freezer was 19*. Opened the back to check the compressor. It ran hotter than normal to the touch. Everything was working. This is the first time that I worked on an Electrolux appliance.
Could it be the inverter?

My Electrolux washer is leaking water.

The ice in my freezer will not freeze all the way

I cannot figure how to access the glass top. Do you have a video that shows how to access control panel and under the glass for the elements?

error code 03

Ice build-up in freezer, Humming sound, Whining sound.

Electrical Smeel, Burning smell, runs for a while then shuts off, E69 Error, E11 Error.

Hello

We have an electrolux ewdw6505gs0 that we have had for about 6 years. Recently it stopped washing the upper rack as good as it used to. It’s not every time but appears to be more bad than good. I have removed all of the parts that the water passes through and have found no obstructions including the pump and hoses underneath. I am very handy and have an extensive set of tools so any repair or diagnostics necessary I should be ok to do. Dishwasher has never had problems until now. My hope is to fix it rather than have to shell out $800 for a new one. I suspect it could be a weak pump or a control board but I dont want to throw unnecessary parts at the problem you have a way I can diagnose what the issue is.

Thank you