Brand: Frigidaire

I’m getting an error code on my oven display that I looked up and it says it’s for the probe? But my husband checked it and it is working properly. So what do we do now? I don’t want to replace it anyway if it’s fine.

Is this my thermostat causing problems or maybe the control? I need to get this going for the holiday. Would appreciate some help.

Could it be something stuck in dishwasher? Not quite sure how to access mine and clear anything out.

My ice wouldn’t come out so I aimed my hair dryer up the despencing hole in the front. Held the rubber black flap up with a wooden spoon and I think I knocked it out of what ever holds it in place because it won’t work now and you can move the piece up and down. how do I get that put back in the slots>

I have it turned all the way up and it’s not getting cold as it should . I have had it 9 going on ten years.

dryer won’t start. turn drum by hand & then push start button it will start. let go of start button it will stop.

When start button is pushed timer lights up and counts down but nothing else goes on. Do I need a new control panel?

THANKS FOR YOUR HELP on our Frigidaire dishwasher. WE ALREADY FORKED OUT $120 AND REPLACE THE CONTROL BOARD AND THE ERROR CODE IS STILL FLASHING. I GUESS WE NEED TO WORK ON THE TOUCH PANEL OR CONSOLE, HUH? That should do it, right? Is there a video showing how to do this?

CHRIS HIGGINBOTHAM

I’m looking for a little direction on what might be happening to my fridge. There’s a lot of frost building up in the back of the freezer on that panel and it’s starting to not cool. It’s done this before and then started working again. The frost diminished and all seemed fine. Now it’s happening again, and it seems to be worse this time. From the videos I watched it seems like it could be a few things. I checked the heater and board last time and again today, they are good. Any way to help narrow this down for me? I’d really appreciate it.

My washer wasn’t spinning so I took off the cover and found a broken belt down underneath. I couldn’t find a video with the part number or model and need a little help in figuring out how to install the new one.

I have a frigidaire dryer that no longer heats, my clothes are still wet inside after two cycles. I had a hard time finding the correct replacement part online and there wasn’t a video I could find for my model. Hoping someone can help!

The outer door panel is broken and prevents the door from closing properly. Since the outside panel was broken, it came off easily. Now I am trying to put it back on. What is the best way to put the door back on? It appears the door needs to be disassembled so it will fit around the door hinge.

Thanks

My vent microwave exhaust fan does not work on the low speed but works fine on the high speed.
I have tried unplugging, waiting and plugging back in with no effect.
All other buttons on the touch pad seem to work just fine.
Any diagnosis tips or is there an obvious solution?

Our dishwasher quit working and is flashing an ER code. How do we diagnose what it needs?

The entire touch pad works except for Bake, Broil, and convection. All the digits and timers clock keep warm, pizza, the rest of the key pad functions. Tried to reset by unplugging. Didn’t work. Oven comes on by using the pizza function. Top burners work as well. Why only a few not work?

Can somebody get me the part number for gas coils for my dryer? It isn’t heating up anymore. My son is going to come fix this for me and I can’t find the number. I keep telling him it’s an easy fix and if I can get him here I want to make sure I have the part he needs to get it working again. Can’t have him yelling at me for not at least doing that. And thank you.

I’m hoping you can determine if this is my ignitor failing, possibly the thermostat, or something else altogether. Most times it heats fine, bakes correctly. Other times it doesn’t seem to hit temperature, or falls short. Looking for some confirmation before replacing parts. Thanks.

how do I access the switches

I’m hoping one of the techs there can help me figure out what part I need to replace. I’ve checked the line and the pump for any debris but didn’t see anything. Just sounds like the pump isn’t actually working correctly. Is it more than one assembly I’ll need to replace? A video would be great as well if you can find one for me.

Refererigerator not cooling replaced main board and defrost terminator worked about 7 days and stopped cooling again any ideas?

The thermostat seem to check out good.The fans in the fridge and freezer are blowing I cannot tell if the compressor goes on or not. What might I check to see if one of the other switches is bad. I don’t know if it is whirlpool or frigidaire. It is a sears coldspot.

it runs, no cool air, the fan works transferring air to the fresh food

My dishwasher will fill with water and it drains fine but it won’t start the wash cycle.I have checked and the circulation motor and pump are free, float switch is working I also checked that everything is getting power. New circuit board, both pumps. I would appreciate any help Ken

My washer has been making a noise and finally stopped spinning. When we took back off the belt was off and the clutch was off. What do I need to do?

My front load washer had been working properly, suddenly it stopped working at the beginning of a load. When I press any buttom it does not make anything. When I turn the knob, the little screen on the washer only shows parts of numbers. I tried to get the error code but it does not respond either. Thanks