Appliance Type: Microwave

Kitchen Aid KEMS308 Built in Combo. Microwave wont heat but seemingly works otherwise. Got F1E5 Replace Micro Inverter Error.

No power on microwave. Found breaker tripped and it worked for a short time but now it’s out again and breaker is good. Model:JVM1740SP2SS

Hello, I am having an issue with my GE microwave. when i enter time and press start, the microwave turns on, and the count down begins , but there is no sound that the microwave normally makes when the food is being heated..wanted to know how to fix that?

How do i change the light bulb in my microwave.

Microwave stops heating after 1.5 minutes. humming also stops but timer continues.

GE Model JVM 1540SP1SS, low power microwaves when door closes, hum/buzz heard. fan nor turntable operates,tap water in glass mildly warmer after counting 30 seconds with door closed, but no time on panel. Open door, press “Add 30 Seconds”, place new glass of tap water in microwave, close door and press ‘Start’. Fan and turntable operate. Hum/buzz not noticeably louder with fan and t-table operating. After 30 seconds, timer sounds, fan turntable stop, but hum/buzz continue. Open door immediately and tap water notably warmer.

I have Microwave model HMV8051U/01. It’s worked fine until recently. Now it doesn’t microwave. Display and interior and exterior lights are working. I have tried the lock / unlock routine several times but no good still. What do the display icons mean? There is not a picture in the manual. When I push 1 minute cooking it sounds like it is working but food doesn’t get warm or hot. There is an icon that looks like a rainbow that comes on.
Thanks

GE microwave oven is malfunctioning. With door closed and nothing set, it hums and the magnetron is definitely putting out. Turntable doesn’t turn and interior light doesn’t come on unless I set the timer, in which case the light comes on and the turntable turns. But, when time to stop, it beeps as normal at the end of the cycle and the turntable stops and the interior light goes out but the magnetron is still on and it is still humming.

Nothing will stop it except leaving the door ajar (and the light come on with the door open) or unplugging the unit. The clock works and I can (supposedly) set the power level and the timer for timed cooking, but as I said, when time to stop, the magnetron keeps running. I tried leaving it unplugged for a half hour hoping that would reset it, but it did not.

Edited to add: Everything on the touchpad seems to work correctly, but the magnetron will not turn off unless we leave the door open or unplug the unit.

GE Over the Range Microwave oven, model DVM1850DMBB

The turntable inside the microwave oven continues to turn. won’t stop.

My microwave won’t heat.

I have a Kitchenaid combo microwave and oven … KEMS309bssoo. The microwave runs fine but when the cooking cycle is complete the unit turns off the light and cooking power but the fan continues to run and the bell does not ring. You have to open the door or press the cancel button to get the unit to completely shut off.

Is there a replacement model for this GE microwave that will fit in the same place, hookups? model CVM2072SMSS. Touch pad not working at all.

Had a power surge during a storm and since then the microwave will not do anything.

I replaced the light under the microwave but it won’t work.

My microwave keeps giving error codes and i dont know what they are.

Our microwave is not heating food. It turns on and light up and the time starts, but then no air or heat comes out
Its an LG model number LMH2016ST.

I have a GE spacemaker microwave the oven is not heating up to make tea we had a power spike the tea hardly heats up even after 6 seconds.

GE Profile microwave will not turn itself off. When the door is opened, the turntable starts to run and the oven is on Tried closing the door three time as suggested on a website — no luck

Kitchenaid built in oven microwave combo KEMS308SSS00. Original call was for a F1E5 error inverter. Inspection of inverter the board was clearly burned in several areas. Replaced inverter board and main control board.

When powered back on got F0E6 lost communication error. Checked all fuses and wires between Appliance Manager Board and microwave user interface. Had to replace manager board. After replacement, F1E5 error came back.

What have I overlooked or done incorrect? I would like to get this running for the family. Thank you.

My Kitchenaid microwave is displaying an F7 error code. What does this mean?

Microwave turntable.

PANEL TURNS ON BY ITSELF AND CHANGES SETTINGS, THE MICROWAVE ITSELF DOESN’T TURN ON, BUT THE PANEL JUST DOES RANDOM THINGS. ANY IDEAS?

THIS IS M/W AND OVEN, NEED TO REPLACE M/W PANEL BUT CANT DISASSEMBLE THE UNIT
DOES ANYBODY HAVE ANY RECOMMENDATIONS?
THANK YOU

Looking at a samsung microwave that is dead. The fuses, t-stats and door switches are all ok.

No wiring diagram. Looking for a wiring diagram and service manual.

Thanks