Brand: Kenmore

I posted a question about a week ago and I checked the refrigerator drain and pan and they are clear and the water tank also. The water is coming from the refrigerator room at the bottom on the left side where there is a vent and damper control. Where does the air supply come from for that vent? I am not talking about the vent in the back. near the water tank where the fixer box and fan is in the rear. The water under the drawer comes from that front vent. The customer says it is often iced up.

All fuses show 120 in and 120 out. Problem is I only have 25 volts to ignitor when turned on. Dryer does not have timer diagnosis legend paperwork. Any suggestions?

I got the error message of f7 E5.
When I turn the machine on. I hear like the actuator or something like it that trying to move but the machine will not kicking on

The cild air Only flow into the refrigerator through the damper when the freezer door is open when I close the freezer door and put my hand in the refrigerator near the damper there was no air flowing

Dishwasher motor doen’t run, Drain works when you it cancel. Unit won’t go into diagnostics. Is there a video that shows you how. I tried any key 3 consecutive times within 1 sec. closed the door. won’t go into diagnostics. Does the tubulity sensor have anything to do with motor running? I’m sure if i’m doing it right to put to diagnostics. They say it has to be in stand by mode. Is stand by mode the pause button or is it with the door open and the start button pushed. It would be really helpfull if they have video on how to put into diagnostics.

Brand:kenmore
model: 110.85091401
dryer it wont responde to any control,
it wont start.
is there any video on this brand?

Asking for the method to change out evap motor and blade for the above Kenmore french door style fridge. Thanks, Steve

There is Frost On the coils in the back of the freezer I check the the heating sensor for continuity I’ve got a resistance reading of 200 however I check the heating element for continuity I manually put the machine into the forest and nothing happens

the two lights were and the unit would not do anything.
I turned of the power and disconnected the ribbon and then reconnected it.
the unit started to work.
buy I still see the lights slightly on

I got a call from an irate customer. He told me that one of the local appliance technician companies came by to look at his fridge. The tech told him that either the ice maker or water inlet valve is bad. He suggested changing them both out. The tech was supposed to get back to him the next day with the price. He NEVER called back. His service charge was $98.00.
The customer finally called the company back, and asked them for details. They told him that they couldn’t get out to make the repair for 2 possibly 3 weeks. That is the main reason that he is upset. After paying them to diagnose the problem and blowing him off for a few weeks, he called me.
I contacted my supply house with the model number. They could have the parts for me in 2 days. HOWEVER, as always, before I go to make ANY repair, I like to “see” what I am up against. So, I go on the Internet and search the parts and installation advice. On this model, I couldn’t find an ice maker anywhere on the Internet. I already ordered the parts, so I know it has one. BUT, why can’t I find any information on it?
I appreciate the guidance that you guys offer. But, I don’t like to bother you, every time I have a problem.
Q. Do you have any information about this ice maker?
Q. Is it hard to install?

why is this unit not making ice cubes

MACHINE DOES WORKS. DISPLAY “AF” ERROR CODE.ELECTRIC DRYER.

Our 3 yr old upright frost free kenmore freezer (2845) seemed to be cooling erratically and I noticed ice build up on the freezer bottom floor. I cleaned the ice off the floor and checked for leaking food – none. The ice has returned. I looked at your videos and think the problem may be a clogged drain. However, I’m not sure how to get at the drain on this model. Thanks for the advice!

Washer exhibits excessive vibration when loaded. OK empty. Washer is level and all suspension components are also OK. Service manual leads to vibration sensor. My question is, where is the vibration sensor? I cannot locate it on the parts diagram. Thank you.

Kenmore Elite dishwasher made by Whirlpool that will not drain properly every time. Will work 1 or 2 cycles then at the end of the 3rd cycle will leave about an inch of water in bottom of the dishwasher. Everytime I drain the dishwasher through the cancel cycle it does just fine.

My Kenmore washer is showing “SUD” & “F02” error codes plus has bad vibration during spin.

My gas Kenmore dryer is not heating.

The door on my Kenmore dishwasher will not latch.

My Kenmore washer will not start.

My Kenmore range is not heating properly.

all the fans are working but i hear a click from the compressor and nothing happens

Researching this and wondering if service bulletin out there for this issue. Customer states doesn’t matter what size load. All I found is impeller issue but would like confirmation. Thank you, Steve

it will agitate but will only spin if i start turning it by hand

from time to time cooking time will appear on the screen the microwave will not be working.
just the numbers will appear.

the washer will intermediately overfill with water.
sometimes during the Rinse cycle.
and sometimes it will work perfectly