Appliance Type: Standalone Icemaker

Hello,
A few months ago, I ran the cleaning cycle on our ice maker. After it completed, everything returned to normal and all seemed fine. Within about couple of days, I noticed a mildew smell coming from the bin. The ice did not smell but there was a nasty moldy smell coming from somewhere inside the bin. I replaced the all the hoses (drains, recirculation hoses, etc) because they looked cloudy and a little nasty. I also found the writing harness from the control box to the connector bracket had a wire that was loose in the harness due to corrosion. I replaced that harness. Put everything back together and everything was fine for a couple of days but the mildew smell came back. I did some deeper checking of things and found a couple of issues.

The problem was that it was not making ice. It is a KitchenAid under counter ice maker. I put it through the self cleaning cycle twice and after it made ice, but then the customer called back saying it didn’t make ice after I left. When I went back I unplugged it for a few minutes then plugged it back in it would make ice one time then quit again. The ice maker does not have a tech sheet to run self diagnostics. Does anybody have a tech sheet or know where I can get one? Do I have a bad PCB? Does anyone know what is wrong with this? Also there is a ice wall in the back, is this supposed to be there? It is solid covering the back so I cannot reach back there without breaking it, which I do not want to do if it is supposed to be there.

Customer complaint is the cubes are small, and only a handful of small cubes unit runs fan runs.
Have not checked the unit yet, do you have a service manual on this Scotsman stand alone ice maker unit.
Any advise and service information would be helpful as I have not checked the unit yet. Thank you in advance for your help.

This unit is making very thin ice. It makes ice consistently but it is consistently VERY thin. KITCHENAID

why is this unit not making ice cubes

No ice in bucket

My LG range wont heat up at all.

I have a Scotsman stand alone ice machine it is producing ice but the ice cubes seem hollow. It seems like it is completing the cycle to quick.

I have A Haier ice maker that is not dropping ice.

My Whirlpool dishwasher will not run

Need service manual on GE nugget Ice maker UNC15NJ

I have a GE Fridge MN:PFFSS6PKWBSS, SN: AR075158. The IM produces a few batches of ice per day. The IM cycles when I hold down the cycle button for 10 seconds and it fills with water. The duct seems to have good airflow to the compartment and the sensor mounted in the back checks out fine. Any ideas?

Light is out.

Need service manual on UCC15NJII Stand alone Ice maker

One of my customers has a Summit model BIM44 which has been horribly maintained. I found everything scaled up, especially the distribution tube over the evap. Pump sounds like it’s running smoothly back there, but it appears the intake from the sump is blocked. I feel like it just needs a proper flush and cleaning. Any tips greatly appreciated!

Hello I have a question on a Whirlpool Ice Maker. I’m noticing these issues: Block of ice on Freeze Plate

Need help looking for service manual ZDIS150ZSSE, ZDIC150ZBBE , ZDIS15SSHALH , ZDIS15SSHARH

Having an issue with an Ice Maker

I have a stand alone ice maker with the square grid wires.The ice will not produce and drop into bin.

Having an issue with an Ice Maker