0 votes
10k views

Please help on error code F8E0

0 votes
6k views

CUSTOMER SAYS THAT THEY HIT POWER BUTTON, IT STAYS ON FOR BRIEF MOMENT AND THEN SHUTS OFF. THEY HAVE TO PRESS THE POWER BUTTON AIN TO KEEP TURNING IT ON.
ERROR CODE F34 COMES ON AFTER POWER FADES. Tried to test power line going into unit to main board but not sure if low voltage should be present.

  • Guest asked 3 years ago
  • last active 3 years ago
0 votes
5k views

Customer says that they can only turn on one out of four burners. one comes on and when they attempt to activate other burners, they get intermitent flashing LED lights on readout. There are two LED readouts. one on left and one on right. after they activate the one burner and start to activate the others, the error code appears. left LED displays
” E ” and right LED displays ” 32 “. Sounds like control board but not sure.

  • Guest asked 3 years ago
  • last active 3 years ago
0 votes
4k views

I’ve just tried to use my broiler for the first time, even though I’ve had this oven for awhile already, and it doesn’t work correctly. It seemed to preheat, but then when I put my fish in, and set the timer, it seems to have shut off on it’s own. I started it over, did the same thing. Is cooling down and not staying on even though it says it is.

  • Mary Hunt asked 5 years ago
  • last active 5 years ago
0 votes
4k views

I’m attaching the Fault Code Guide for Frigidaire Appliances, the E014 error code lost connection between the User Input Board and the main board. I bet the cracked cook top probably has something to do with it. Frigidaire Range says EO-14 Code is present . He has a bad cooktop as well frame cracked.

0 votes
4k views

Our range is beeping non-stop and flashing the aforementioned error code. From what I could find online, this is a shorted keypad. So what part do I need and is there a video that could show me how? I really don’t want to have to get a new range and am hoping this won’t be too difficult.

  • Zak Thornton asked 5 years ago
  • last active 5 years ago
0 votes
4k views

The large oven tends to take a longer time to preheat, even though the hidden bake element and the broil element are cycling during the preheat. Also, should the throat elements be coming on to assist pre-heat, or are they only used to convect?

0 votes
3k views

I am replace a control board on a GE wall oven model JGRP16GEP1BG. Problem is the instructions to wire the cooling fans are completely useless, the wiring diagram came with 3 sheets. The first sheet has some useful info on installing jumpers and the bake and broil relays, but the next two pages were from a front load washer on installing a soap dispenser, these were all stapled together! There is a third relay which I will have to do a live test to see what that relay is doing if anything.

  • Gary Z asked 5 years ago
  • last active 5 years ago
0 votes
3k views

Hello,
I am trying to install a new oven control board in a Bosh wall mount oven. I get the control panel off just fine, the problem is getting the silver cover off. I removed the knobs no luck, I tried prying it off didn’t work. The only thing I see are the tabs in each corner, I tried to move those as well no luck. The screws that hold the board in place are put in from the front so I know this has to come off somehow just don’t know how.
Any help would be greatly appreciated.

Thank you,
Greg

  • Guest asked 4 years ago
  • last active 4 years ago
0 votes
3k views

Seems like the main oven door is not contacting with the latch/light switch.

0 votes
3k views

Hi, I wanted to find out how to replace the element in my oven? It cracked and broke in half while I was using it and my neighbor said I could probably handle replacing it myself. Would you advise this? I’m not sure if it’s something I could do or not. Any help would be appreciated!

  • Andrea asked 5 years ago
  • last active 5 years ago
0 votes
3k views

We have a Jenn-Air/Maytag Appliances JDS9860AAP oven, which displays an F1 error code not long after reaching a preheat temp (typically 350). After clearing the error, it eventually comes back multiple times as the oven cools and has to be cleared each time as it cools its way down.

  • Guest asked 3 years ago
  • last active 3 years ago
0 votes
3k views

I need to find parts for Verona through Eurochef. Any help will be greatly appreciated

  • Randy W. asked 5 years ago
  • last active 5 years ago
0 votes
3k views

Working on this dacor wall oven originally giving a u60 error, cooling fan, installed cooling fan and we are still getting the error. Can anyone assist us with a tech sheet and some direction where to go next? Thank you.

0 votes
3k views

Viking Professional Series Dual Fuel Gas and Electric Range…need to buy parts and find repair help ? Thanks

0 votes
3k views

I have this IN WALL OVEN with an F7 E6 ERROR
From what I read it says control panel problem, I think it’s a membrane that has gone bad
But I can’t find a part number for that… anybody have a clue?

0 votes
3k views

I have this Samsung induction range not heating and has error codes, can you provide any information on the induction range ? Thanks Tim

0 votes
3k views

f3 e2 error when you use the micro I replaced the erc because there was no display now I get this code and I already checked sensor I was thinking about installing another erc

  • Guest asked 5 years ago
  • last active 5 years ago
0 votes
2k views

Thermador Professional range with a bad thermostat.
The part # is 00486945
Some of the part #’s that may work are 14-19-866, 14-39-038 or 412888.
Is there a company that rebuilds old thermostats?
What a shame to retire an otherwise perfect range for lack of a part.

  • Guest asked 5 years ago
  • last active 5 years ago
1 vote
2k views

THE CONTROLS WILL NOT WORK

  • zelik123 asked 3 years ago
  • last active 3 years ago
0 votes
2k views

My name is Roland,
Question: I am working on a Kitchen Aid dual fuel gas range MD# KDRU7893VSS03 SN:DB1375935. The issue with this unit is there’s an error code which says NTC out of Range. I have tested all fuses in the back of this unit, I have changed the sensor -W1076760, the boiler assy -9758598, the appliance manager-w10339702. Still when power up, it goes into lock out with NTC out of range, call for service.
Can anyone help with this issue please. I await your response.
Roland

0 votes
2k views

I need the parts list for this model or a video if you have one for the mail control board ?

0 votes
2k views

Looking for two Thermador hinges part # 00488417
Any help would be appreciated

0 votes
2k views

my husband says that he checked the igniter and it ohm’s out as being fine. He says it seems like the “spark isn’t reaching or big enough to ignite the burner.” Does anyone there know what could be happening here?

  • anna asked 5 years ago
  • last active 5 years ago
0 votes
2k views

Have a kitchenaid wall oven. Model KEBS107SSS04
Error code says to replace the ( UI ), I assume this means USER INTERFACE.
touch pad and pc display board. Neither are identified as a UI and both are costly.

0 votes
2k views

when baking at 400 degrees oven door will lock can’t get food out until it cools down and food burns. It doesn’t do it all the time but most of the time. It’s GE Profile Drop in range. I notice the Fan was making a funny noise and was wondering if this could cause it to get to hot and lock up. The thermostat and control board seem to be working fine.

  • dan0418 asked 4 years ago
  • last active 4 years ago
0 votes
2k views

This customer had used the oven for about four hours earlier in the day. The oven was off and the bake element shorted out. I know there is always 110v volts to one side of the element. Is it common for an element to short out on it’s own when not in use? Customer is worried that there may be something wrong with the control board. I replaced the bake element and checked for power from the board. The only power present is on the one side coming from the terminal block. Control turns the element on and off with no problems. Control board has no visible problems and is working fine. Is there any concern here? Thank you in advance.

0 votes
2k views

G E range # JGS968SEK1SS ordered a new control board, installed now the range has a code LOC REF unplugged range powers up LOC REF
2 seconds than all the led lights on board on for 15 seconds, than LOC REF appears again cannot clear, can someone help me with issue.

0 votes
2k views

Neither element works. I tried broil, bake, etc.

Lite functions inside the oven.

No other sign of power.. Nothing happening.

  • Drew asked 5 years ago
  • last active 5 years ago
0 votes
2k views

Electrolux range today, According to tech it was built by Dacor. We were transferred to Dacor and sat on hold about 15 mins and never got an answer. The customer complaint is with the racks removed he sets the unit into self clean and the light showing “remove racks” stays lit, the door won’t lock and go into self clean. With the rack rails also removed the rack switch does click like it’s working. Any advice sure would be appreciated.

Showing 1 - 30 of 1k results