Appliance Type: Stove / Oven / Cooktop

Overheating condition Error Codes E-0A E-27 E-28.

Replaced door lock after power on .after 30 seconds display F1 what F1 means

My Whirlpool range is not heating up.

Looking to have a touch panel rebuilt as it is no longer available. Part #WB36K5120
My inquiry found a company called “Applianceboards.com” which may be located in either Georgetown or Austin TX. Is this a legit company and/or has any one had any experience with them? They did email us a phone their contact number after hours, but cannot find anything at BBB. We just had the board for this oven rebuilt and now the cancel pad is not working, programs bake only.

Thanks in advance,

I have a a 48″ Jenn-air range ; customer complain that main oven flame was sputtering and shut off. They started smelling gas he called gas company they came out and said he had a gas leak. I went out and order a regulator. Replaced regulator unit still does the same thing all other burners are Ok could it be the safety valve?

What part do I need to fix this? Think it’s just the element.

Wiring diagram needed for Frigidaire dual range Model# PLCF489ACB
I am having the board rebuilt by CoreCentric and would like to have the wiring diagram to make sure everything is wired correctly. I am not the first to work on this. Any help is greatly appreciated.I would try looking for a video at ApplianceVideo.com. Just type in your symptom and look for a free video.

My cooktop is not heating up.

This is built in microwave/oven combo, and I’m looking at a bad control. Are they still available? And do you guys carry them?

Good morning.
Thank you for helping me out with this issue. Apparently, the selector knob has stopped the ability to increase and decrease the digital numbers on the screen. The stove top works fine, and the buttons to select oven temp, clear settings, cook time etc (along both sides of the selector knob) work when pressed..however when i press the “oven temp” , “cook time” ,”timer” buttons the “0:00” or “0” digits appear on the screen but as i turn the knob (clock wise) to set the temp of time the digits do not move. I need your help..do you think its the mother board behind the selector knob? by-the-way..When I press the button “Oven Func” >then select Bake..then press “Oven Temp” and “0” appears on screen..even with a value of the “0” the oven will “click” on.
Please help..any assistance is greatly appreciate it!
Sincerely,
Nelson

This is a dual wall oven
The problem is the doors are not closing all of the way.

Is there a way to adjust the cam? The spring does not have enough tension to fully close the door.

It’s clear how it works. It’s also clear how to remove it. What I do t get is why it does not work. It’s almost like to four springs (one for each hinge) is now too long to close the door correctly.

I’m hoping you will come back and say “Do this to adjust the spring tension”.

Look bellow for links to two photos of the hinges:

View post on imgur.com

I have a customer’s Kenmore Elite Oven/microwave combo in which the microwave portion is not heating food. Can you post the tech sheet for this model? I have just about exhausted all means of repair.

My GE oven is not heating.

It’s saying stuck key.
I changed the kaypad and I still got the same error.
I changed the control board and I am still getting the same error.
Please advise

The customer was selfcleaning the oven and it went blank. I replaced the fuse PN 4451042 at the EOC. and then get the e1f2 code. I need the tech sheet. Does this code indicate a problem with the ribbon from the touch pad to the eoc? Any help appreciated.

THIS IS SECOND TIME ASKING WHAT COULD BE PROBLEM
AND WHAT IS OHMS ON SAFTEY VALVE WOULD BE TWO PIN ON TOP AND TWO PIN ON BOTTOM
PLEASE LET ME KNOW THANKS SO MUCH

Trying to do a lookup and my usual sites aren’t working, need the igniter part for this unit. Current one is not lighting at all anymore. Appreciate you guys always being willing to help me out!

Dacor Wall oven. Upper oven would no heat, lower oven working fine.
Double oven electric. Upper oven would not heat. no power to the element. visual inspection on PCB relay shows the the relay is burnt. put in new board and now “F4” fault shows for both top and bottom ovens. Put in old board and F4 still shows for both ovens.
Trying to avoid having to remove the oven. No wiring diagram. It appears that the oven sensor (upper oven) was replaced some time ago (because of the wire nuts). What is throwing me is that the bottom was working and the only thing that changed was the board and when I returned it to its original state – the bottom is not working.

Any help is greatly appreciated.

My GE stove keeps overheating.

The burner and infinite switch part number is w10823734. The espy sensor harness on the old and new sensors won’t work on the new INF SWitch . or would it be simpler to use the old burner with the 12002121 INF SWITCH?

I need a wiring diagram. And any help you can give.