Appliance Type: Stove / Oven / Cooktop

Just wanted someone to confirm this as a spark module for me and looking for part information. Thanks!

Electric unit that no matter what the temp is set at, it exceeds and keeps going. Thinking main board issue?

l G range I was cooking on one burner then it shut down everything on range. No codes no L E D lights no time no burners no oven. I do have power to stove to transformer to mother board. Over load ck ok . PCb looked up being subbed out is this problem why?

I’m attaching the Fault Code Guide for Frigidaire Appliances, the E014 error code lost connection between the User Input Board and the main board. I bet the cracked cook top probably has something to do with it. Frigidaire Range says EO-14 Code is present . He has a bad cooktop as well frame cracked.

Viking Professional Series Dual Fuel Gas and Electric Range…need to buy parts and find repair help ? Thanks

Samsung Range the oven wasn’t reaching temp. Upon arrival at the home the clock was dead. It will turn on when any burner is turned on. The burners won’t come on and the oven won’t come on. We can’t find any paperwork with the range.
Any and all advice would be appreciated, a Service manual would be a great help.
Thanks in advance.

The temperature seems to have no control, is consistently off and moving instead of maintaining what’s set. Replaced ignitor and still having some intermittent issues.

I have a Frigidaire oven M#PLCF489ACB – no bake. The bake element test good for continuity. When put in bake mode, the broil comes on , but the bake element does not come on at all.
I feel that this will be the EOC, because if it was a thermal fuse/cutoff, then the broil would not be working. Cannot find wire diagram with the unit.

Range in question heats oven intermittently then stops heating. Model sf362lsxqo. I replaced the burner and spark ignitor, spark module, temp probe, and lastly the clock/control board. I bought a rebuilt control board from Part Simple and when received it was in a corcentric box. I have closely checked the wiring. With each part replaced the symptoms tree main the same. I believe the customer will now be replacing the oven. Has anyone had similar problems with whirlpool spark ignition? I’m wondering if I got a bad board. Any advice would be welcome. Thank you.

Range in question heats oven intermittently then stops heating. Model sf362lsxqo. I replaced the burner and spark ignitor, spark module, temp probe, and lastly the clock/control board. I bought a rebuilt control board from and when received it was in a corcentric box. I have closely checked the wiring. With each part replaced the symptoms tree main the same. I believe the customer will now be replacing the oven. Has anyone had similar problems with whirlpool spark ignition? I’m wondering if I got a bad board. Any advice would be welcome. Thank you.

I need the parts list for this model or a video if you have one for the mail control board ?

Wanted to post a quick reminder out there to check out all valves/fittings/connections on gas appliances. Had another one today that just needed tightened down at the compression fitting at the safety valve, and that was all it took. Whenever you work on gas, take a few extra minutes to check please! Easier to do when you’re in there already.

I found the control bad and replaced it, only to realize there must be a secondary issue. I thought the board just shorted causing the burning smell but am now thinking there’s something else going on.

The oven wasn’t heating up and the stove wasn’t working either. Indicator light wouldn’t go off even when cool and not in use. Was able to reset the board and it seemed to work fine. Should I stress to replace it or let it go as is for now since it’s working again?

Just wanted to post a reminder to check some of the ignitor positioning on these ovens, I didn’t find any issues with this unit, but the ignitor was not located close enough to the bake tube so it wasn’t always coming on. Sometimes in delivery, moving, or reinstalling appliances after a remodel it’s just a matter of checking the components are in their correct place for proper operation.